colt cams dyno results!, 5sfe + colt cams = MOAR POWAAA!! Options

[presure2]

hey guys, a couple weeks ago, i installed a set of colt cams for zac (6g96gt).
he got a mild grind, so i was just as anxious to see what kinda gain he would get from them VS stock, and the mild webcams that I had on the 5sfte.

i forgot my thumb drive, so ill have to go back to get the runfiles to be able to overlay the runs, but just by the numbers, he made 135whp, uncorrected, and ~ 140ftlbs IIRC. he has some printouts that im sure he'll post later tonight when he gets home.

dustin made ~123whp with the webcams, but the powerband is quite diffrent between the 2. the coltcams are definetly smoother, with more overall gains, where the webcams were much peakier, with all the gains coming above 4K rpm. once i get the runfiles, ill be able to illustrate this much better, with more details.
for now, i will add a pic i took while tuning it at the dyno.
it shows 2 runs.
the blue one is when we first got there, without any tuning, the red one is after a handful of runs of playing with the SAFCII.
blue run = 115.16whp, 131.06ftlbs with STD correction.
red run = 128.61whp and 140.17ftlbs with STD correction.



goes to show its definetly worth it to pick up and dyno tune a SAFC or somthing after mods like this..hell, even stock you can probably gain 10-15whp from an SAFC by leaning the fuel curve some.
enjoy zac!

[6G96GT]

Yeah man, my engine was totally rebuilt like brand new last year so my specs are tight. It'd be like stock 135 up to now 160-165 before the % loss.

This post has been edited by 6G96GT: Nov 18, 2011 - 8:14 PM