![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 8, '09 From Westport, MA Currently Offline Reputation: 6 (100%) ![]() |
hey guys i need some advice here, im running a Stage 4 Comp 6 puck sprung clutch and it catches very low ever since it was installed after i did my swap. now that the car is off the road i have a lil more time to pluck away at the small issues that need to be delt with.
ive tried to bleed the clutch several times and it still catches low, (right at the floor) literally.. i have the clutch held to the floor and i lift not even half an inch and it grabs, is it supposed to be like that? is that just how this clutch is? the clutch itself is fine, i checked it when i replaced my tranny after a 1000miles on the swap lol. the clutch engages and shifts properly its just very low and its annouying at times espically when in traffic. any advice or other options would be helpful, thank you -------------------- st205 powered ss3 coupe
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 8, '09 From Westport, MA Currently Offline Reputation: 6 (100%) ![]() |
thats what im going to have to do, i was trying to avoid messing with the pedal but ive tried everything else and the clutch has about 6k on it so i kno its broken in. thanks for the tip guys.
-------------------- st205 powered ss3 coupe
|
![]() ![]() |
Lo-Fi Version | Time is now: February 22nd, 2025 - 1:58 AM |