 break hardware question |
 Dec 2, 2011 - 11:12 PM
|
 
|
 Enthusiast  Joined Nov 24, '07 From Tucson, Az Currently Offline Reputation: 2 (100%)  |
so, I have now, for two days in a row, have tried to replace my brakes... yesterday the guy at the store gave me the wrong pads and hardware (have me the caliper grommets actually). he said the computer gave him the wrong numbers. fair enough. so I got back to day, get seemingly the right size brakes and, from what I know, the right hardware for the pads.
well I couldn't get the pads on with the hardware, and the old hardware I have is shot or missing pieces, also look completely different from what the guy gave me. I did, with some modifying, get the pads in with the new hardware, but they were so tight against the rotor, I knew it just wasn't going to happen. so does anyone know or have a picture of the correct hardware to get? Thanks, Kevin oh and I have 97 ST brakes, front. Thanks This post has been edited by Soulend: Dec 2, 2011 - 11:13 PM |
Posts in this topic
RabidTRD Hardware from a dealer is cheaper than you might t... Dec 3, 2011 - 12:42 PM Soulend Bad part about that is... in my City(State even) d... Dec 5, 2011 - 3:39 PM
RabidTRD Usually as long as you make sure to wire brush off... Dec 5, 2011 - 11:38 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 2nd, 2024 - 1:42 PM |