![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Dec 9, '05 From Germany Currently Offline Reputation: 0 (0%) ![]() |
Hi, after over a year of gathering parts my Celica finally is in the garage and gets her custom header, exhaust and some other stuff.
Yesterday we fitted the big Evo9 intercooler, i had to get the ST205 crash bar because the stock one is to tight, intercooler piping was done too and i'm very happy with it. I will use the stock ST205 air filter box, since there is not much space between the filter box and the engine, the IC piping is a little bit tricky but it looks like we found a good route. ![]() ![]() ![]() ![]() The header will be done in the next days. ![]() Short list of parts i'm using: - Garrett T25 Turbo from a CA18DET - Mitsubishi EVO 9 Intercooler - E-manage Ultimate - Innovate LC-1 Wideband - ST202 3S-GE Injectors (372ccm) - ST205 Fuel Pump - Bosch Blow-Off from a Audi S3 - Custom Header and 3" Exhaust - dozens of other small parts ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Dec 9, '05 From Germany Currently Offline Reputation: 0 (0%) ![]() |
Any update? ![]() Nothing too exciting.. the engine is in the car with the T28 turbo, i got everything done to start the engine but had lots of trouble with the ignition. The engine fired right up but died immediately, everytime ... i played with the fuel map, turned the distributor in every position but the engine wouldn`t run. Here's a short video: Vimeo I decided to completely remove the old ignition system and build me a coil on plug system. I will use a Avensis 7A-FE distributor as crank angle(24 instead of 4 teeth) and sync pickup. The coils are from Bosch (part#: 0 221 504 024), since they're dumb coils withouh build in igniters i have to use an external (part# 0 227 100 211) Those coils fit quite well, the only problem could be the hood since they're connectors face in that direction ...... ![]() I hope i'll have some time soon to install this stuff. boobs!!! ![]() ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: August 18th, 2024 - 7:57 PM |