![]() |
![]() |
![]() |
|
Enthusiast Joined Dec 14, '11 From Sydney Currently Offline Reputation: 0 (0%) ![]() |
Hey guys,
I thinking about doing the V6 camry engine conversion on a 1990 SX. Just wondering dose anyone know if the ST185 gearbox will fit to any camry engine. i was hoping convert her to AWD. Cheers Guys |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) ![]() |
Im working on doing a v6 swap too
there is info on hear about it yrs you can search an find this info but its still not super clear an the sticky don't give alot of info eather I chose to stick with the s54 to swap the awd trans in you'll need a flywheel an pressure plate to match motor an clutch disc to match trans at you'll also need gt4 mounts an a custom pass side mount and the wiring is little bit of a nightmare from what I've been told so far good luck with your swap -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 ![]() |
![]() |
|
Enthusiast Joined Dec 14, '11 From Sydney Currently Offline Reputation: 0 (0%) ![]() |
Im working on doing a v6 swap too there is info on hear about it yrs you can search an find this info but its still not super clear an the sticky don't give alot of info eather I chose to stick with the s54 to swap the awd trans in you'll need a flywheel an pressure plate to match motor an clutch disc to match trans at you'll also need gt4 mounts an a custom pass side mount and the wiring is little bit of a nightmare from what I've been told so far good luck with your swap Thanks mate ![]() not again im sure if it bothers you that much you could choose not to reply or discard it from your memory |
![]() ![]() |
Lo-Fi Version | Time is now: April 22nd, 2025 - 12:38 PM |