FS: Group Buy D2 Coilovers Options

[mong_logic]

Hello Everyone,

I was referred here from Manny to start offering the 6gc community quality parts at an affordable price. Therefore, to kick things off, we will have a group buy for D2 RS Coilovers.


ARE YOU TIRED OF YOUR 6th gen looking like a 4x4? Will we have an affordable solution for you all...D2 RS Coilovers

CLOSE THAT GAP!!!



To commit, go ahead and start a list and once we get 5, this group buy is good to go.













***We only ship to CONFIRMED addresses***
If you reside in areas such as Jamaica, and do not have a confirmed address, pm me and we can work something out.



Car Applications:

(Part# D2-T06) 94-99 Toyota Celica All Trims Exc. All-Trac.................Spring Rate 7.5kg/ 4.5kg


***For Spring Rate 1kg is equal to 56lbs***



Description
The RS coilover system is a 36 way damper and rebound adjustable monotube full coilover system. The setup has separate height and pre-load adjustments allowing for optimal adjustment and allowing full strut travel at all times. Pillowball upper mounts and top mounts are constructed of 6061 powder coated aluminum. Threads are teflon coated to prevent rust. Rebuildable and serviceable in the US.


Features
36 levels of adjustable damping
Made from high quality 6061 aluminum with T6 for increased hardness
Adjustable spring perch for height adjustment
Adjustable body allowing maximum suspension travel
Pillowball top mount with adjustable camber (not available for some models)
Monotube high pressure design reduces oil leakage
Electroplated body for protection from corrosion and rust


CONTENTS
Set of four coilovers: front left, front right, rear left, and rear right
Spanning adjustment wrenches
Dampening adjustment keys





850 shipped to lower 48 states. Alaska, Hawaii, PR, Guam and International Shipping will be an additional fee.


RISK FREE MONEY BACK GUARANTEE
As long as we haven't shipped it yet and you decide later you don't want to buy anymore, don't worry we will give you a full refund.

CA sales tax applies to CA Residents.


Local Pick Up's accepted.


If you have any questions that have not been answered, please contact me via pm or post below and I will get back to you ASAP.


Commits

1) 94celicadude

This post has been edited by mong_logic: Oct 24, 2011 - 3:31 PM

[UndecidedPC9397]

Very interested, but dont put me down yet, need to figure my funds for the project.
Still have a couple questions, sorry if they've already been answered:
1) Do these bolt right in or do you need extra bolts? and will it come with the bolts to allow it to bolt in?
2) How much of a drop do they offer?
Im guessing any other question I have will be answered by the instruction manual if I get these lol

These were on Sugarfree's old black hatch when I bought it from him. Check out the pictures on his profile. I believe you can lower it up to 3 inches, and they're 36 way adjustable in the dampening force. Plus you can adjust the camber/caster with the adjustments on the coilovers themselves. They should have all the screws with them, but you may need to grab a couple of camber adjustment bolts for the rear. At least that's what Sugarfree had!

Awesome, thanks for the responce! and how does that camber/caster ajustment work (sorry, new to alot of this...) and I can imagine you have to have it off the ground in order to do the adjustments lol. and can you grab the camber screws from an autozone?