Help please ripping my hair out Options

[aqua1996]

Hey all

I just came in from under the car and im about to kill some one.

Im doing my front and rear engine mounts. Now this seems like a simple task as ive done it before on other cars. now the problem is.

Jacked car up and on stands, Cross member bolts are out and front engine mount off.

My problem is with the rear mount. all the bolts are out and both the mount and crossmember are free but stuck and wont come out.

ive jacked engine up and down but cant get it out. the problem is there is not enough room to get the mount out.

anyone done this recently that might be able to shed light on my problem.

Thanks in advance\

Bevan

[rave2n]

Yea I had to use a deepwell socket to get it out, I believe I ended up kneeling on the valve cover to get it done too.

If I remember correctly that is the reason I didn't try to get it otu of the block first because it was such poor spot, but the end result was I had to get that bolt, to get her out.

This post has been edited by rave2n: Jan 13, 2012 - 7:33 AM