RHD BEAMS Progression/Build Thread, Finally Getting to Finish Options

[ricochet1490]

Just some teasers of things to come...
Where this car used to be... here


Where it is now (at my garage)


What it's going to be getting

and


Stay Tuned!

This post has been edited by ricochet1490: Apr 26, 2015 - 8:20 PM

[ricochet1490]

Picked up the clip today in cincinatti....

So now this progression will become a reality as soon as finals are over.
Shout out to Richee3 for the CLEAN shell at a great price with all the right parts.
Shout out to FORGMANN for the CLEAN clip at a great price complete with extra parts.
Shout out to BOTH of those guys for a ton of support, parts, and kindness. You've made this a reality for me.

This will not be halfazzed. It will retain U.S. VIN# for ease in registration and liscensing. Firewall swap over for RHD. Every part from the clip will be used with the exception of the control arms and various other parts that I will need to retain USDM suspension. Even though there are some good prices on Superstrut on the forums now.... not knowing what that means for my usdm rear end in the car and what it means for replacement parts.... I will retain all usdm suspension and brakes. The exception is the JDM anti-ock brake system. Auto climate control will also be installed.

Items I will need if anyone has these at a good price lol.... i'm not in a hurry because they are cosmetic but before I drive it I'll have to have it... but just keep it in mind haha
1) set of jdm tails
2) ssiii riser blocks and accompanying spoiler
3) ssiii body parts. splitters etc.
4) set of 17" wheels

Keep me in mind guys!! lol

On a more serious note - here is the plan of action:
1) finish finals, week of Thanksgiving (Nov 2_th)
2) weekend after deer season begin tear down of shell, complete gutting, interior, carpet, dash, everything (complete by end of first weekend in december)
3) firewall of shell cut out either that weekend or shortly thereafter. Saving all cables for trunk pop/gas etc. - setting aside all usdm parts for later install into my DD, sale on 6gc, give back to Richee3 because of all of his previous kindness.
4) drop motor from clip out of the bottom ( I have a forklift etc.) and begin clip tear down (noting and saving all bolts and wiring locations) Drop motor by christmas.... have clip torn down and parts organized by Jan 15 2012
**Classes start back up and progress will drastically slow so I need to do as MUCH as I possibly can before Jan 3. **
5) reweld clip firewall into shell and begin running chassis wiring. Have wiring run and dash parts more or less installed by Feb7 (my birthday)
6) install interior with EXTRA sound deadening everywhere with legit RHD center console ( from FORGMANN, he's the man) Complete by Feb 22
7) Install engine bay parts and tie up odds and ends like wiper bulkhead. Matching spray paint color to car - paint firewall- Complete by March 12.
8)Install engine subframe into shell by installing from bottom. Hello forklift - Hook up all engine electronics/fluids/fuel etc - Complete and have running by March 26 (end of spring break)
9) Install exterior parts/pieces tails, jdm fenders, bumpers etc. - finish by april 15
10) bleed brakes - bolt on wheels - drive to buereau of motor vehicles and get registered and liscensed - May 5th
11) Run the piss out of the car for a weekend, park it and begin all remaining body work that MIGHT need to be done if I haven't gotten to it yet. - Send to paint and have painted the color she was.... sleight blue gray.
12 Project complete for my College graduation.. Present to myself.

HERE WE GO!!

This post has been edited by ricochet1490: Nov 7, 2011 - 1:30 AM

[richee3]

Picked up the clip today in cincinatti....

So now this progression will become a reality as soon as finals are over.
Shout out to Richee3 for the CLEAN shell at a great price with all the right parts.
Shout out to FORGMANN for the CLEAN clip at a great price complete with extra parts.
Shout out to BOTH of those guys for a ton of support, parts, and kindness. You've made this a reality for me.

This will not be halfazzed. It will retain U.S. VIN# for ease in registration and liscensing. Firewall swap over for RHD. Every part from the clip will be used with the exception of the control arms and various other parts that I will need to retain USDM suspension. Even though there are some good prices on Superstrut on the forums now.... not knowing what that means for my usdm rear end in the car and what it means for replacement parts.... I will retain all usdm suspension and brakes. The exception is the JDM anti-ock brake system. Auto climate control will also be installed.

Items I will need if anyone has these at a good price lol.... i'm not in a hurry because they are cosmetic but before I drive it I'll have to have it... but just keep it in mind haha
1) set of jdm tails
2) ssiii riser blocks and accompanying spoiler
3) ssiii body parts. splitters etc.
4) set of 17" wheels

Keep me in mind guys!! lol

On a more serious note - here is the plan of action:
1) finish finals, week of Thanksgiving (Nov 2_th)
2) weekend after deer season begin tear down of shell, complete gutting, interior, carpet, dash, everything (complete by end of first weekend in december)
3) firewall of shell cut out either that weekend or shortly thereafter. Saving all cables for trunk pop/gas etc. - setting aside all usdm parts for later install into my DD, sale on 6gc, give back to Richee3 because of all of his previous kindness.
4) drop motor from clip out of the bottom ( I have a forklift etc.) and begin clip tear down (noting and saving all bolts and wiring locations) Drop motor by christmas.... have clip torn down and parts organized by Jan 15 2012
**Classes start back up and progress will drastically slow so I need to do as MUCH as I possibly can before Jan 3. **
5) reweld clip firewall into shell and begin running chassis wiring. Have wiring run and dash parts more or less installed by Feb7 (my birthday)
6) install interior with EXTRA sound deadening everywhere with legit RHD center console ( from FORGMANN, he's the man) Complete by Feb 22
7) Install engine bay parts and tie up odds and ends like wiper bulkhead. Matching spray paint color to car - paint firewall- Complete by March 12.
8)Install engine subframe into shell by installing from bottom. Hello forklift - Hook up all engine electronics/fluids/fuel etc - Complete and have running by March 26 (end of spring break)
9) Install exterior parts/pieces tails, jdm fenders, bumpers etc. - finish by april 15
10) bleed brakes - bolt on wheels - drive to buereau of motor vehicles and get registered and liscensed - May 5th
11) Run the piss out of the car for a weekend, park it and begin all remaining body work that MIGHT need to be done if I haven't gotten to it yet. - Send to paint and have painted the color she was.... sleight blue gray.
12 Project complete for my College graduation.. Present to myself.

HERE WE GO!!

So are you keeping pretty close to your schedule? Also, your upcoming birthday has been noted.