 ST204 5SFE PROJECT, boost , paint, rebuild |
 Apr 2, 2011 - 10:17 PM
|
 
|
|
Enthusiast  Joined Feb 27, '11 From trevorton pa Currently Offline Reputation: 0 (0%)  |
hey guys ...... just picked up a non running 96 celica gt for 1000 bucks about 6 months ago with a half fast turbo kit . i wish i had pics ........... it had pvc plastic pipe as intercooler pipe and a 14mm socket welded in the oil pan for the oil drain and also had that **** plastic nylon tube you get for a boost gauge he had it as a oil feed to the turbo ...the hole kit he made cost him 400 bucks what a joke //////// going to give you guys the low down on the new project car !!!!!!
what she looked like when i first got her ....... looks good in the pic butt it is ruff  as i whas pulling the first piston out it fell into 5 peaces and the compression rings where broke in half ... thank god the block is fine   got new nipon 87.00 mm pistons   i got a rebuilt head for 350 bucks   as the first start i had some miner leaks like the injector o ring was twisted but it was an easy fix. so i got 10.000 miles on the fresh engine with and still running like a champ ....... now HERE COMES THE PAINT ......dent ,,,,dent dent,,,  i welded up the front side lights and cut out new side light holes in the back of the fender for the sleeker look .. got them out of 2003 land rover fenders witch are very nice because they have a orange smoked color   there whas a ugly brace in the middle of the wing i had to get rid of      all taped and all primed ready to paint ..... i used a ford black .. the paint code is UA ...transtar product and allso clear    right after the over spray cleared out i had to take a pic ....... or two     a day after the wet sand and buffed  BOOST TIME ebey stainless log for 150 buck and 38mm turbonetics wastegate   polished up the air housing and paint the exhaust side and got the down pipe off of ebay .............. if you have any questions about this i can send any one links /////// turbo is a t3 with 63 exhaust wheel and 50 air  the new tial bov its like Christmas when i get home and this **** is sitting on the steps lol   and this is where i am at right now i took them today     im thinking of getting this front bumper .....NO OR YES ...  and the rota torque ....... bad ass  
This post has been edited by TRD11: Nov 29, 2011 - 9:11 PM -------------------- cant stop wont stop
|
 |
Replies
|
Nov 20, 2011 - 7:14 PM
|
|
|
Enthusiast Joined Feb 27, '11 From trevorton pa Currently Offline Reputation: 0 (0%) |
now it comes to this 6 hours of dam labor lol
 \\ old one coming out   fresh pulled it out of a 99  installing  got new gauge over lays .... bad ass they glow white  moved my 3 gauges  and new steering wheal i got for 30 bucks lol and the dash pad i got for 13 bucks 
This post has been edited by TRD11: Nov 20, 2011 - 7:15 PM -------------------- cant stop wont stop
|
|
Feb 6, 2012 - 3:29 PM
|
|
 Enthusiast Joined May 4, '05 From western MD/NOVA Currently Offline Reputation: 2 (100%) |
QUOTE (TRD11 @ Nov 20, 2011 - 7:14 PM)  how did you fit that? i see that it is a bit farther back in (to clear the deeper bezzle on the AEM gauge). i got the same single DIN holder and an AEM temp gauge, but am having some issues fitting it. and how did you fasten it to the sterio brackets/frame? thank you. 
-------------------- |
|
Feb 6, 2012 - 8:10 PM
|
|
|
Enthusiast Joined Feb 27, '11 From trevorton pa Currently Offline Reputation: 0 (0%) |
.
This post has been edited by TRD11: Apr 8, 2012 - 8:57 AM -------------------- cant stop wont stop
|
|
Feb 6, 2012 - 8:22 PM
|
|
|
Enthusiast Joined May 4, '05 From western MD/NOVA Currently Offline Reputation: 2 (100%) |
QUOTE (TRD11 @ Feb 6, 2012 - 8:10 PM) QUOTE (mandrek @ Feb 6, 2012 - 4:29 PM) QUOTE (TRD11 @ Nov 20, 2011 - 7:14 PM) how did you fit that? i see that it is a bit farther back in (to clear the deeper bezzle on the AEM gauge). i got the same single DIN holder and an AEM temp gauge, but am having some issues fitting it. and how did you fasten it to the sterio brackets/frame? thank you. http://www.ebay.com/itm/52mm-UNIVERSAL-TRI...997153955435086 QUOTE (TRD11 @ Feb 6, 2012 - 9:08 PM) QUOTE (mandrek @ Feb 6, 2012 - 4:29 PM) QUOTE (TRD11 @ Nov 20, 2011 - 7:14 PM) how did you fit that? i see that it is a bit farther back in (to clear the deeper bezzle on the AEM gauge). i got the same single DIN holder and an AEM temp gauge, but am having some issues fitting it. and how did you fasten it to the sterio brackets/frame? thank you. http://www.ebay.com/itm/52mm-UNIVERSAL-TRI...997153955435086 i just fliped this to get it to fit the celly ? fliped it? but i do not see how that would allow for the plate to fit.. the issue i am having is that it is too long, and if mounted the way it supposed to be, the AEM bezzle inter fears with the trim to mount back on the correct way. #gonna go and take a pic of what im having issues with brb. This post has been edited by mandrek: Feb 6, 2012 - 8:26 PM -------------------- |
|
Feb 7, 2012 - 7:20 AM
|
|
|
Enthusiast Joined Feb 27, '11 From trevorton pa Currently Offline Reputation: 0 (0%) |
.
This post has been edited by TRD11: Apr 7, 2012 - 6:30 PM -------------------- cant stop wont stop
|
Posts in this topic
TRD11 ST204 5SFE PROJECT Apr 2, 2011 - 10:17 PM
HectortheRican Good work so far! Apr 2, 2011 - 11:41 PM NGHTKD can't wait to see all the progress with this... Apr 2, 2011 - 11:48 PM TRD11 hey thanks Apr 3, 2011 - 4:51 PM smkr3w dont mean to sound like an idiot (though i prolly ... Apr 3, 2011 - 5:36 PM TRD11 well i heard that the 3s head will give you more o... Apr 3, 2011 - 8:03 PM SwissFerdi ^ Definitely is.
I like this build a lot, very cl... Apr 3, 2011 - 9:50 PM whatthe Mad as sleeper, cool lip too. Apr 3, 2011 - 10:50 PM lagos very impressive work! Now just get some nice ... Apr 4, 2011 - 7:55 AM CoreyST I really like this celica, and the lip doesn't... Apr 4, 2011 - 8:31 AM TRD11 thanks guys ,,,,, it runs like **** now but im goi... Apr 4, 2011 - 5:42 PM
PolliS_5S-FE QUOTE (TRD11 @ Apr 4, 2011 - 5:42 PM... May 30, 2011 - 3:37 AM NGHTKD rota torque with a tough offset or black XXR BBS L... Apr 28, 2011 - 10:01 AM Supersprynt I wouldn't get the bumper. Apr 28, 2011 - 12:18 PM mak5603 You've brought that car a long way, nice work.... Apr 28, 2011 - 1:04 PM KALLusion good choice of rims, they will go good with the fr... Apr 28, 2011 - 8:37 PM NGHTKD as you've probably heard with that bumper, loo... Apr 29, 2011 - 5:47 AM Needles hey that engine looks NICE !!! i love ... May 28, 2011 - 12:00 AM whatthe So sexy. Please make a video. May 28, 2011 - 1:42 AM TRD11 lol yea its hard to keep clean for a daily ...... May 28, 2011 - 7:06 AM Ted95 great work so far man, im impressed! those whe... May 29, 2011 - 3:02 PM KAOS Wow what a beautiful build... you make the 5S owne... May 30, 2011 - 11:41 AM NYp8tBaller07 I really love the front, looks very nice May 30, 2011 - 12:33 PM TRD11 R.I.P to the 5sfe................. only has 5 ps... May 31, 2011 - 4:50 PM PolliS_5S-FE Is it dead!? May 31, 2011 - 4:54 PM NGHTKD .
Keep us updated! May 31, 2011 - 9:02 PM TRD11 yea i was just cruzin and the one hydraulic lif... May 31, 2011 - 10:49 PM NGHTKD QUOTE (TRD11 @ May 31, 2011 - 11:49 ... May 31, 2011 - 10:52 PM PolliS_5S-FE QUOTE (NGHTKD @ May 31, 2011 - 11:52... Jun 1, 2011 - 12:20 AM TRD11 well im looking to be around 300 whp .... im think... Jun 5, 2011 - 6:20 AM NGHTKD for 300whp stick with 5SFTE!
if i was going 5... Jun 5, 2011 - 9:48 PM TRD11 i need h beam rods for a 5sfe and i cant find any ... Jun 11, 2011 - 8:00 AM TRD11 i found rods for a 5sfe ..... mr2 .. but are the... Jul 28, 2011 - 9:43 PM TRD11 well ......... my oil gauge was going bad and the ... Nov 12, 2011 - 7:36 AM ricochet1490 QUOTE (TRD11 @ Nov 12, 2011 - 8:36 A... Nov 23, 2011 - 2:12 PM TRD11 QUOTE (ricochet1490 @ Nov 23, 2011 - 3... Nov 23, 2011 - 8:25 PM al94st 3 post to 2 post spoiler modification looks cool, ... Nov 12, 2011 - 8:56 AM SwissFerdi Don't buy Rotas. Good luck with the engine tho... Nov 12, 2011 - 12:32 PM TRD11 well when i first got the car there was a big 1/12... Nov 20, 2011 - 7:00 PM TRD11 and my dirty ass engine bay i did not clean in a w... Nov 20, 2011 - 7:19 PM Bimbo I like the the lip you have on but the bumper you ... Nov 21, 2011 - 11:07 PM TRD11 QUOTE (Bimbo @ Nov 21, 2011 - 11:07 ... Nov 22, 2011 - 7:18 PM BonzaiCelica nice pick up on the dash and steering wheel. Ya I ... Nov 22, 2011 - 3:13 AM Bimbo LOL. I new about the emblem because my first car w... Nov 23, 2011 - 12:55 PM kurt95gt Yea just like my thread shows that's normal
I... Nov 23, 2011 - 8:02 PM TRD11 QUOTE (kurt95gt @ Nov 23, 2011 - 9:0... Nov 23, 2011 - 8:28 PM kurt95gt yea same spot Nov 23, 2011 - 8:44 PM mrmatt beautiful car man i love it. Nov 23, 2011 - 9:16 PM TRD11 QUOTE (mrmatt @ Nov 23, 2011 - 10:16... Nov 23, 2011 - 9:41 PM TRD11 my new visor Nov 24, 2011 - 3:33 PM TRD11 clean bay Nov 24, 2011 - 8:46 PM Ted95 looks cleann man i like the new setup. those black... Nov 25, 2011 - 11:35 PM TRD11 well got some good and bad news haha ....... t... Nov 28, 2011 - 9:36 PM TRD11 QUOTE (TRD11 @ Nov 28, 2011 - 9:36 P... Dec 2, 2011 - 8:36 PM NYp8tBaller07 beautiful build my man, love the sticker XD Dec 1, 2011 - 7:32 AM kurt95gt Only ebay brand clutch ill use they've worked ... Dec 2, 2011 - 9:09 PM TRD11 new 7gen short sifter on the way .... Dec 2, 2011 - 10:52 PM TRD11 ripped the tranny out today
yeap junk the spring ... Dec 3, 2011 - 3:18 PM TRD11 im sad down time Dec 3, 2011 - 6:29 PM NYp8tBaller07 is that a crack I see in the weld? Dec 4, 2011 - 11:25 PM TRD11 QUOTE (NYp8tBaller07 @ Dec 5, 2011 - 12... Dec 5, 2011 - 8:19 PM TRD11 got it today Dec 6, 2011 - 6:52 PM TRD11 this clutch is a peace of **** ....... xtd crap... Dec 11, 2011 - 7:06 PM kurt95gt wow that's surprising to hear Dec 11, 2011 - 7:11 PM TRD11 QUOTE (kurt95gt @ Dec 11, 2011 - 8:1... Dec 11, 2011 - 9:41 PM PolliS_5S-FE REFUND!! Dec 11, 2011 - 9:43 PM TRD11 QUOTE (PolliS_5S-FE @ Dec 11, 2011 ... Dec 11, 2011 - 9:54 PM UndecidedPC9397 this is a beautifully done Celica. Your celica may... Dec 17, 2011 - 7:58 PM TRD11 THANKS MAN ..... WELL I MADE THE EYE LIDS WITH... Dec 18, 2011 - 9:17 AM TRD11 MY FRONT LIP ,,,,,, WAllMART GARDEN CENTER Dec 18, 2011 - 9:31 AM TRD11 GOT NEW SNOW TIRES ,,, PIC OF A OLD TIRE LOL ... Dec 18, 2011 - 9:34 AM Mani man those tyres are suicidal.....beautiful lookin ... Dec 18, 2011 - 9:49 AM UndecidedPC9397 Thanks for the responce, and its a really nice tur... Dec 19, 2011 - 11:38 PM TRD11 QUOTE (UndecidedPC9397 @ Dec 20, 2011 - ... Dec 20, 2011 - 7:09 AM SwissFerdi FWIW, stock GT piping is 2"? Fairly sure a tu... Dec 20, 2011 - 8:45 AM TRD11 QUOTE (SwissFerdi @ Dec 20, 2011 - 9... Dec 20, 2011 - 7:06 PM Ted95 QUOTE (TRD11 @ Dec 20, 2011 - 7:06 P... Dec 20, 2011 - 11:34 PM TRD11 QUOTE (Ted95 @ Dec 21, 2011 - 12:34 ... Dec 21, 2011 - 7:18 AM UndecidedPC9397 [/quote]
thats going to be my next project .... g... Dec 21, 2011 - 3:53 PM UndecidedPC9397 Oh, and what are you lowered on and how much? Dec 27, 2011 - 11:31 AM TRD11 QUOTE (UndecidedPC9397 @ Dec 27, 2011 - ... Dec 27, 2011 - 10:09 PM TRD11 by the way i got my short sifter ...... and hated ... Dec 31, 2011 - 8:42 AM RabidTRD QUOTE (TRD11 @ Dec 31, 2011 - 8:42 A... Dec 31, 2011 - 5:00 PM TRD11 QUOTE (RabidTRD @ Dec 31, 2011 - 5:0... Jan 8, 2012 - 10:39 AM FortuneCookie Yeah. I hate them too. You're better off with ... Dec 31, 2011 - 9:12 AM UndecidedPC9397 QUOTE (TRD11 @ Dec 27, 2011 - 11:09 ... Dec 31, 2011 - 1:58 PM TRD11 well it whas fun wile it lasted ....... turning... Feb 5, 2012 - 9:42 PM dakotahwyatt QUOTE (TRD11 @ Feb 5, 2012 - 10:42 P... Feb 6, 2012 - 10:01 AM KAOS So are the gauges facing the wrong way then? Looks... Feb 6, 2012 - 8:16 PM TRD11 just remembered the only reason it fits in my car ... Feb 10, 2012 - 4:46 PM TRD11 a couple thinks i did different //////// new kyb... Apr 7, 2012 - 6:27 PM SwissFerdi Why took turbo off? Those wheels look great. Specs... Apr 8, 2012 - 11:16 AM kurt95gt Hes got a baby on the way so i think it was a reli... Apr 8, 2012 - 12:57 PM TRD11 yea going to have a baby shortly /////////// the... Apr 8, 2012 - 8:34 PM Tigawoods you going to come out to the TST spring meet? it w... Apr 10, 2012 - 9:39 AM |
9 User(s) are reading this topic (9 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 8:37 PM |