![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Jan 24, '12 From titusville pa Currently Offline Reputation: 0 (0%) ![]() |
im installing new headers, but under the factory manifold, below the heat shield, there is something. people have told me it could be a second cat which would mess up me puttin the headers on, ive heard its the resonator, ive heard flex pipe. its the thing between the downpipe and the gasket from the header. i was just wondering what exactly that part was.
|
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) ![]() |
No, the cat will not fit with the header. After you install a header on a 7A, there will be a gap in the exhaust between the header and the Celica's exhaust. You can have a shop fabricate a piece that will fit between the header and the car's exhaust that will bolt up so you can put the stock manifold back in when/if you have to do an emissions test.
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
![]() 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 4:39 AM |