6G Celicas Forums

Welcome Guest ( Log In | Register )

> GT4 Help, GT4 Cluster
post Feb 14, 2012 - 11:17 AM
+Quote Post
shai



Enthusiast
*
Joined Aug 19, '09
From westminster
Currently Offline

Reputation: 0 (0%)




Is there away to get my turbine gauge on the GT4 Cluster working? Do I have to link another wire towards the ECU to get it working or do i have to get an GT4 dash harness?
 
Start new topic
Replies
post Feb 19, 2012 - 12:21 AM
+Quote Post
Smaay

Enthusiast
*****
Joined Dec 8, '03
From Lancaster CA
Currently Offline

Reputation: 6 (100%)




how about doing a write up with detailed pics.


--------------------
2001 Celica GT-S Turbo
1997 Supra TT 6speed
1997 Celica 3MZ/1MZ swap
1990 Celica All-Trac
post Feb 19, 2012 - 2:54 PM
+Quote Post
placham



Enthusiast
*
Joined Nov 24, '10
From Worth, IL
Currently Offline

Reputation: 5 (100%)




QUOTE (Smaay @ Feb 19, 2012 - 12:21 AM) *
how about doing a write up with detailed pics.


It was a on the fly type of thing, had both clusters side by side and wrote down each terminal pin on each plug on paper. Than checked both plug terminals against each other St204 and St205 noticed which wires had to be removed, and moved to different plug.
I was doing my 4th Gen 3SGTE swap and did the cluster then and there also wired in Dakota Digital SGI8.
Only wire you physically have to run is boost meter signal from ECU, other wires get cut just so they reach into different connector on cluster. Also rear fog lamp indicator is a bonus on J-spec cluster if anyone is into doing that to their Celi.

Advice I can give u is start with easiest things first like high beams, turn indicator, idiot lights, illumination, leave ones that u cant figure out for last it will be easier to do.
And I dont think one write up would cover all USDM Celis, Im not too familiar but think theres differences in options, for one I dont have ABS on mine or AT vs MT.
And its easier done than me sitting here trying to explain to you how to do it. Once your actually doing swap it starts to click, oh okay this goes here and that goes there type of thing.
your looking at about 2.75-3hrs with pulling everything apart to reassembly.

This is my 3rd cluster conversion I did.
Did my 92 Prizm, wanted that cool looking cluster with TACH from 92 Corolla DX I think, had nice OEM illumination rings around gauges (was ultra nice), swapped entire dash and all plastic trimmings from AE92.
Did my '90 240sx cluster, swapped in a '97 Kouki 180sx Type-X "digital cluster", was one of the easier ones as cluster harness unplugs from main body harness, so u can take it onto a table and do all work there, also with spare harness can be moded ahead of time.



Posts in this topic


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 3rd, 2024 - 9:47 PM