Lots of Oil coming out of my PCV, I passed my compressiont est, piston OK. Options

[XXX_Mina]

ok, i passed the compression test... now what
whats a reason allot of oil is coming out of my
PCV the numbers were from left to right: 150,
150, 145, 145... the car lost about a quart of oil when i raced 1/2mil @12 psi, and lost 1/8th of a quart when i floored it down a small street after doing a compression test... the car runs fine , smooth, except for the oil coming out of the breathers.


what do these 3rd gens have that would make them
do something like this look close at pics of
my engine bay.

for those of you who are not familiar wit my car, here is a mod list.

JDM 3rd generation 3sgte Engine and 5 speed LSD Tranny from a 1997 Mr2 turbo.
SDS EFI 4f Coil system with backlit display. (standalone ECU)
Custom Front mount intercooler: Using the Core of the Evo from 2 fast 2 furious.
Greddy Profac B Spec II Electronic Boost controoler.
Greddy Full Auto Turbo Timer.
Custom 3" Exhaust System with a Magnoflow Muffler.
HKS Super Sequntail Blow off Valve.
Haulmeter's Digitail Air/Fuel Gauge
Wallbro Supra Fuel Pump
Unorthodox Racing Underdrive Pulley

and here is a pic of my engine bay

[XXX_Mina]

it was only cranked 4 times.... the compression test is weird... basically they remove the spark plugs, and hook up this machiene to where the plugs go, then they cracnk the ignition like 4 time, or whatever times.... my mechanic did it 4...and comrpession builds up, so after 4 cranks it was 150, maybe after 5-6 it would be 200.

on a cool note: allot of unburned gas got in my exhaust during the test, and it bogged big time when the test was done and we started it up again... too bad i didnt have a camera, it scared the **** out of me thou.

even on stock boost oil comes out those things...


Mina

This post has been edited by XXX_Mina: Feb 11, 2004 - 1:10 PM