 cooling issue |
 Mar 3, 2012 - 9:47 AM
|
 
|
|
Enthusiast Joined Feb 3, '11 From jamaica Currently Offline Reputation: 0 (0%)  |
hi guys i just discovered last week that my 3sge gen 3 is pushing the coolant into the over flow bottle. i have in a aluminum radiator less than 2 months old first i change the cap to a toyota gen 1.1. same problem this morning i open the radiator and notice it was half full because i had remove the overflow hose from the bottle so it wasn't able to suck back, start the car let it idle with out the cap i notice whenever i rev it the coolant level rise in the tank, let it idle and would receed.
i then allowed it to idle and it rise the coolant level till it was running over,whenever the fan comes on it would work properly.is that headgasket on its way out or fan switch This post has been edited by gtprominient: Mar 3, 2012 - 9:49 AM |
Posts in this topic
nics Too much pressure means internal leak. Have the he... Mar 3, 2012 - 9:59 AM gtprominient the pressure is not strong it seems that a little ... Mar 4, 2012 - 1:18 PM
gtprominient can anyone say if i can get the spout of the alumi... Mar 5, 2012 - 6:26 AM  |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 11:48 AM |