 Helicoil |
 Mar 12, 2012 - 7:36 PM
|
 
|
 Enthusiast  Joined Jul 27, '06 From Soda Currently Offline Reputation: 9 (91%)  |
I was just wondering....if I had a helicoil done, would I need to replace the block? The previous owner had a spark plug flew out so a helicoil was done. Jw because im planning on adding a turbo just for kicks and planning to rebuild everything and this is something I want to replace.
--------------------  |
 |
Replies
|
Mar 12, 2012 - 8:10 PM
|
|
 Enthusiast Joined May 4, '05 From western MD/NOVA Currently Offline Reputation: 2 (100%) |
well... if it was the spark plug it would not be the block that you would have to replace.. it would be the head.. and that would be only if the helicoil does not hold. i don't know about the spark plug area.. but most of the time if i strip the threads on anything to the point that i would have to put a helicoil in, i just drill it out and re-tap it for a slightly bigger bolt. or in the case of it being two flanges, i just clean the threads out, and push the bolt through, and put a nut and washer on the other side.. (or even weld on in, if need be)...
7A, 5S? JW -------------------- |
Posts in this topic
block Helicoil Mar 12, 2012 - 7:36 PM
block 5sfe. The previous owner said the spark plug just... Mar 12, 2012 - 8:32 PM mandrek well if you plan to boost it and you are going to ... Mar 12, 2012 - 10:04 PM block I've seen quite a few on craigslist. Ill prob... Mar 12, 2012 - 10:13 PM b22ri22an Ebay 5SFE Head
not a bad price on a head with cam... Mar 17, 2012 - 4:20 AM Bitter if it's sticking up like that it was done wron... Mar 17, 2012 - 6:52 AM Smaay i have a complete 3S-GTE head with cams, valves, s... Mar 17, 2012 - 10:26 AM
mandrek isn't pressure2 doing a 5sgte on one of the b... Mar 17, 2012 - 3:33 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 18th, 2025 - 3:02 PM |