Clutch Master Cylinder, Which one is it? Options

[trdproven]

Are there two types of clutch master cylinders for my 94 2.2L Celica GT? I converted my car to manual back in 2009 and my generic clutch master brand is about to give out. I'm running 3sgte light flywheel and clutch from Competition Clutch. sometimes it gets stuck and i have to pick it up by hand and pump it, fluid is slightly lower than full, and fluid is hella dirty, looks like an internal seal leak to me. Plan to buy an OEM one. I've seen online on toyota sites - two kinds of masters though, 1 that goes up with a long neck reservoir (i have this type) and the other one looks like a typical one with a long cylinder and stubby reservoir. I cannot just put my VIN in because my VIN is for automatic. so when I use toyodiy for the part number i get the stubby one on the toyota site, I want to be sure what I'm getting because I do not know for sure if thats just an illustration because i have the longer neck type. BTW, I've also seen the stubby ones as well for sale so thats why i think there are two.

Are there any performance clutch master cylinder and slave for our cars?



This post has been edited by trdproven: Feb 14, 2012 - 5:49 PM

[trdproven]

for example if you pump, does that slave rod move? if not look if the master is rising in fluid, thats a sign of a bad master, sometimes they overflow. ive seen bad masters pedal feel weak but it comes back up. black color is from the seals that went bad and dirties the fluid. try pulling back that slave boot and pump to see if it leaks. Usually sinking pedal is a bad slave or air or leak. i have a feeling its the slave, again try pulling back that boot cover off the slave and have someone pumping and see if it leaks from there. if the rod is returning it sounds that the slave cannot hold pressure and that black fluid is the seals that wore out and its leaking from that area. if it was the master that rod pretty much wont move at all cus the master creates the pressure so if the master was broken it won't create pressure for the slave to push.

This post has been edited by trdproven: Apr 18, 2012 - 2:38 AM