3" downpipe power increase?, about how much? |
3" downpipe power increase?, about how much? |
Nov 28, 2011 - 11:43 PM |
|
Enthusiast Joined Feb 1, '05 From Charlotte NC Currently Offline Reputation: 14 (100%) |
Hi guys, Ive been wondering how much HP increase do you get when you add a 3" downpipe to your turbo setup? ive been told in the past at least 10hp, but before making a thread i decided to do some searching....
http://www.mr2oc.com/showthread.php?t=2714...horsepower+gain and now I have a headache... on our 3s its obvious that a wider diameter exhaust makes room for more power, but ABOUT how much typically? I actually read 98% of that thread, and while VERY informative, i didnt get a question answered after all the searching. anybody know the answer? cheers! -------------------- |
Mar 29, 2012 - 3:13 PM |
|
Enthusiast Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) |
250AWHP at 17 psi is not the same as 17 psi on a Front wheel HP, the drivetrain loss is a big factor here, 3rd gen 3s make right around 300 HP at 18 psi ( 2WD )
This post has been edited by Culpable04: Mar 29, 2012 - 3:16 PM -------------------- |
Apr 22, 2012 - 7:09 AM |
|
Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
250AWHP at 17 psi is not the same as 17 psi on a Front wheel HP, the drivetrain loss is a big factor here, 3rd gen 3s make right around 300 HP at 18 psi ( 2WD ) whats the specs on the engine/turbo/intercooler/management on that???? those are pretty good numbers, but that trailing off after 6k can be fixed (potentially meaning a higher max hp can be achieved) -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
Lo-Fi Version | Time is now: November 23rd, 2024 - 8:49 AM |