3rd Gen 3SGTE from ODB2 to ODB1?, Engine won't turn over............ |
3rd Gen 3SGTE from ODB2 to ODB1?, Engine won't turn over............ |
Apr 24, 2012 - 7:39 AM |
|
Enthusiast Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
I apologize if this info is somewhere else, I searched and could not locate what I needed.
I am taking a 3rd gen 3S out of a 97' (ST ODB2) celica and putting it into my 94' (GT ODB1) celica. I have swapped a 3S into a 94' before, but not a 3rd gen and not into a ODB2 car. Is there any differences in wiring in the engine to an ODB2 car vice the ODB1 car? Will I need to rewire anything or will this be plug and play? Thanks! This... In to this.... This post has been edited by jcbass7: Jul 13, 2012 - 2:04 PM |
Apr 24, 2012 - 8:16 AM |
|
Enthusiast Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) |
I dont think you need to do any changes to the wiring, the engine was never made OBD2 so is an OBD1 engine, if anything, the changes were on the OBD2 car, but that wont affect your swap.
is a straight swap from what I can tell. -------------------- |
Lo-Fi Version | Time is now: November 27th, 2024 - 6:02 AM |