 Sway bar polyurethane bushings, Anyone found some that fit our old celicas?? |
 Nov 29, 2011 - 7:34 PM
|
 
|
 Enthusiast  Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%)  |
I have searched, and searched. No clear answer as to the size of our stock sway bars, but I seem to see that they may be
F: 18mm and R: 16mm, can this be confirmed? Also, I see that the brand Prothane makes universal poly bushings. I hope you can see where I'm going with this. Will these fit? or is the length measurement off? Or Can anyone direct me to some that are known to fit? I would measure my bushings but they are disintegrated pretty badly to the point I am not sure I would get a proper measurement. Worst case scenario, I buy squishy OEM rubber replacements. FRONT 18mm REAR 16mm -------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
 |
Replies
|
Apr 30, 2012 - 5:28 PM
|
|
 Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
Im guessing the fronts need 20mm bushings and best fit for rear is 17mm?
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
|
Apr 30, 2012 - 7:15 PM
|
|
 Enthusiast Joined Jan 17, '08 From JB MDL, NJ Currently Offline Reputation: 30 (100%) |
QUOTE (trdproven @ Apr 30, 2012 - 6:28 PM)  Im guessing the fronts need 20mm bushings and best fit for rear is 17mm? Yup. 16 is a tight fit. If you can reuse the brackets on the rear...one side is longer than the other and itll,make it easier. Not saying you cant use the ones that come with them. I had a hard time getting bolts to thread in, then again it coulda just been me. |
Posts in this topic
samir0189 Sway bar polyurethane bushings Nov 29, 2011 - 7:34 PM
RabidTRD Energy Suspension makes a set that fit perfectly. ... Dec 3, 2011 - 12:46 PM RabidTRD OK, part number that fits perfect from Energy Susp... Dec 3, 2011 - 10:31 PM easternpiro1 good stuff, from what i hear this is a great inves... Dec 4, 2011 - 1:14 AM samir0189 QUOTE (RabidTRD @ Dec 3, 2011 - 10:3... Dec 4, 2011 - 9:29 AM
easternpiro1 QUOTE (samir0189 @ Dec 4, 2011 - 10... Dec 4, 2011 - 7:56 PM samir0189 The front sway bar on my car is 20mm. I will look ... Dec 4, 2011 - 3:50 PM samir0189 Seems like the part number for the front would be ... Dec 4, 2011 - 6:14 PM richee3 I'm tempted to replace several bushings in my ... Dec 4, 2011 - 10:20 PM Malhar95 how much do these cost avg.? im not tracking or sw... Dec 5, 2011 - 12:58 AM samir0189 QUOTE (easternpiro1 @ Dec 4, 2011 - 7... Dec 5, 2011 - 1:52 PM RabidTRD One thing I will suggest, and highly recommend doi... Dec 8, 2011 - 5:09 PM samir0189 I received the bushings today actually. I'll p... Dec 8, 2011 - 5:44 PM RabidTRD I'd say to take a piece of sand paper and wrap... Dec 8, 2011 - 7:57 PM samir0189 Well. They were a bit of a pain to install, yes. O... Dec 10, 2011 - 7:26 PM RabidTRD Omg your bars have absolutely no rust on them at a... Dec 10, 2011 - 11:17 PM Ted95 nice work! anxious to hear how the car rides w... Dec 12, 2011 - 11:09 PM samir0189 QUOTE (RabidTRD @ Dec 10, 2011 - 11... Dec 14, 2011 - 12:20 PM SupraKid Samir why did you get red bushings appose to black... Dec 14, 2011 - 10:29 PM RabidTRD Do the colors really make a difference? I got blac... Dec 15, 2011 - 7:17 AM SwissFerdi $35 you say, huh? I may has to invest in thes... Dec 15, 2011 - 8:16 AM Spider77 QUOTE (SwissFerdi @ Dec 15, 2011 - 9... Dec 28, 2011 - 8:17 PM samir0189 @andrew - 1. Didn't know the color made a diff... Dec 15, 2011 - 10:20 AM SupraKid The more lube the better I always say. Dec 15, 2011 - 12:52 PM RabidTRD Omg lmao!
So then I could have run my black o... Dec 18, 2011 - 1:22 PM mkernz22 ebay!
http://www.ebay.com/itm/CELICA-ST202-ST... Dec 20, 2011 - 3:09 PM SupraKid uhm...Kern those are more expensive.. Dec 20, 2011 - 3:42 PM mkernz22 i know, but it's still another option Dec 20, 2011 - 5:36 PM SupraKid Will be installing my set and kirk mounts tomorrow... Dec 28, 2011 - 9:27 PM stephen_lee GT and ST have different sized sway bars IIRC. Dec 29, 2011 - 9:56 AM doctavic QUOTE (stephen_lee @ Dec 29, 2011 - 10... Nov 20, 2012 - 11:37 PM SupraKid These things are SWEEEEEEETTTTTTT. Definitely a di... Dec 31, 2011 - 10:06 PM Ted95 QUOTE (SupraKid @ Dec 31, 2011 - 10... Dec 31, 2011 - 11:43 PM SupraKid Yea and I got the black ones. With lube they go on... Jan 1, 2012 - 2:38 AM Ted95 QUOTE (SupraKid @ Jan 1, 2012 - 2:38... Jan 1, 2012 - 12:53 PM RabidTRD QUOTE (SupraKid @ Jan 1, 2012 - 2:38... Jan 2, 2012 - 1:15 PM RoyO Anyone installed these? http://www.ebay.com/itm/ST... Jan 1, 2012 - 4:56 PM SupraKid *Couch cough searchyoumuthafugginnoob cough cough*... Jan 1, 2012 - 5:26 PM RoyO QUOTE (SupraKid @ Jan 2, 2012 - 12:2... Jan 2, 2012 - 3:09 AM Spider77 Ordered a set......on an off topic, amyone try the... Feb 25, 2012 - 8:01 PM Spider77 Rear sway bar for a GT is 17mm (according to my ol... Mar 6, 2012 - 2:30 PM SupraKid My thoughts exactly about the 7th gen short shifte... Mar 6, 2012 - 3:59 PM jordisonjr Has anyone used these sway bar bushings: http://ww... Apr 1, 2012 - 11:34 AM mkernz22 QUOTE (jordisonjr @ Apr 1, 2012 - 12... Apr 4, 2012 - 10:12 AM jordisonjr ohhhh haha my bad.
did you end up getting these? o... Apr 4, 2012 - 12:43 PM jordisonjr Do you have to jack up the car to replace the rear... Apr 21, 2012 - 4:19 PM trdproven just following up on this thread, is it confirmed ... Apr 27, 2012 - 6:54 PM jordisonjr I just put in the 16mm on the rear, with the brack... Apr 30, 2012 - 8:59 PM trdproven did the ES bushings change the feel from a daily d... Apr 30, 2012 - 10:43 PM jordisonjr I wasn't able to finish installing them yet.
I... Apr 30, 2012 - 11:31 PM Syaoran PROPER SIZES for a GT (ST204): 20mm front, 17mm re... Nov 21, 2012 - 12:53 AM doctavic 16 it is for me then (AT200), thank you Syaoran...... Nov 21, 2012 - 7:11 AM Syaoran QUOTE (doctavic @ Nov 21, 2012 - 8:1... Nov 21, 2012 - 2:58 PM doctavic QUOTE (Syaoran @ Nov 21, 2012 - 2:58... Nov 29, 2012 - 5:45 PM RabidTRD I own a ST204 and have 16mm rear bars. Nov 22, 2012 - 1:55 PM Syaoran QUOTE (RabidTRD @ Nov 22, 2012 - 2:5... Nov 23, 2012 - 2:35 PM BillyM81 My black 94 gt and my yellow parts car both have 1... Nov 23, 2012 - 3:39 PM RabidTRD My GT is a 94. It never had a gap on the bushing. ... Nov 24, 2012 - 10:28 PM delusionz you guys have 20mm front??? what the hell!... Nov 26, 2012 - 10:46 PM BonzaiCelica QUOTE (delusionz @ Nov 26, 2012 - 11... Nov 27, 2012 - 1:18 PM delusionz i wonder if the front bar from an st204 would fit ... Nov 27, 2012 - 3:38 PM Syaoran AWD cars are similar to FWD cars in that they tend... Nov 28, 2012 - 2:59 AM delusionz ISH!
the rear swaybar will lift the outter wh... Nov 28, 2012 - 2:47 PM SwissFerdi Having the rear dampers harder for more traction m... Nov 28, 2012 - 3:05 PM Syaoran Stiffer springs in the rear help to both improve t... Nov 28, 2012 - 3:30 PM BonzaiCelica it is very possible to fit the st204 sway bar on s... Nov 29, 2012 - 3:07 AM jordisonjr Torching a sway bar, and bending it to fit seems l... Nov 29, 2012 - 2:06 PM RabidTRD Is anyone else having crazy loud creak noises? Did... Nov 30, 2012 - 9:50 PM Galcobar QUOTE (RabidTRD @ Nov 30, 2012 - 7:5... Dec 1, 2012 - 11:00 AM SwissFerdi Rubbing on the frame somewhere, I bet. Nov 30, 2012 - 11:03 PM jordisonjr ^ This. Dec 1, 2012 - 3:45 PM richee3 I've had mine on for around 7-10k miles now an... Dec 1, 2012 - 11:34 PM Galcobar QUOTE (richee3 @ Dec 1, 2012 - 9:34 ... Dec 3, 2012 - 6:41 AM BonzaiCelica i had a annoying creak on teh front sway bars, but... Dec 2, 2012 - 2:44 AM RabidTRD I've lubed the hell out of them... I used the ... Dec 4, 2012 - 2:57 PM Galcobar I relube mine about that, but I suspect that's... Dec 4, 2012 - 6:47 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 3:55 PM |