Acer a100 tablet as a head unit Options

[b22ri22an]

earlier i attempted to make a custom phone dock to replace my stereo head unit, but my fabrication skills were lacking. I wanted something cleaner and a little bigger screen size. I bought a acer a100 7" tablet and permantly installed in my dash and so far I love it.



first order of business was using a razor blade to remove plastic ribs and the 2 clips that were preventing the tablet from sitting flush



checking the fit to make sure I could get the whole screen visible within the double din opening

the using some double sided mounting tape around the edges of the inside bezel I pressed the tablet into place, hooked up the charger and the headphone jack to the factory amp




finished product, I should have been a little more careful with the mounting tape, was too close to the edge and is visible, tomorrow I will pull it back out and have the mounting tape a little further from the edge so that it isn't seen

better pic in daylight with toyota wallpaper


Update to include parts list
1x Acer A100 Tablet
1x Acer A100 Vehicle Charger
1x 12V Accessory Socket
1x 90 degree 3.5mm to RCA jacks
2x Male to Female RCA 2 way splitter
1x Wiring Harness Adapter for 6 speaker stock amp
1x Volume Control
1x 3M double sided automotive mounting tape

This post has been edited by b22ri22an: May 19, 2012 - 4:24 AM

[Culpable04]

so, after some digging, found pictures of one taken apart, and as expected, the camera is soldered directly onto the board, but no fear, I have a friend who's a master of soldering very tiny electronics, and she saw the pictures and heard my idea, and said she can do the soldering for me and would take no longer than 2 hrs. so with that out of the way, the rest is just basic installation.


I will update the tablet to ICS before install, and will do all of the app download and settings before install, because my phone contract still has a few months to go, so no android based phone for me till then.

for those who care to know this. the Acer tablets come with an empty slot on the mother board where you can install a 3g card holder, it even comes with the holes for the screws and all, so all you need is the 3g card holder and antenna, no fancy fabrication as everything is pre-designed for it.

[rave2n]

for those who care to know this. the Acer tablets come with an empty slot on the mother board where you can install a 3g card holder, it even comes with the holes for the screws and all, so all you need is the 3g card holder and antenna, no fancy fabrication as everything is pre-designed for it.

Why does this solution keep getting better and better....