 Any one have a clue on if there is any LSD that will fit in the A246E?, LSD for the ST auto? |
 May 9, 2012 - 2:34 AM
|
 
|
 Enthusiast  Joined May 4, '05 From western MD/NOVA Currently Offline Reputation: 2 (100%)  |
ok, ok.. for real now.. i dont want to here any mess about "just swap to a manual".. i have many reasons for keeping the car an auto.. my car is finally back on the road, and wrapping up phase one of my project. and in preparation for phase four of the project i am starting this thread to investigate the possibility of getting an LSD for the ST Auto trans. seeing as there are SOOOOOO many parts that are shared in the Toyota transitions. i am hoping that one of the many trans series' LSD's will fit in the A246E or perhaps from another trans.. the load will be light(ish) and the cooling system that i am building up for my auto will be perfect for one of the lighter multi-disk type LSD's over one of the more expensive gear type LSD's (like quafes ATB), so i would prefer a multi-disk type.. (if i have a choice)
the car will be turbo'ed DD, and week end Auto-x'er.. so the need for the additional grip will be needed. has any one worked with this trans or ever tried to mess with it at all? or even had it apart and able t compare internals? any help and constructive input would be greatly appreciated. -------------------- |
 |
Replies
|
May 9, 2012 - 11:46 AM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
the 7A-FE trans shares the clutch with the 1ZZ/2ZZ but thats about it. i dont think the LSD is compatible
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
May 9, 2012 - 11:56 AM
|
|
|
Enthusiast Joined May 4, '05 From western MD/NOVA Currently Offline Reputation: 2 (100%) |
QUOTE (Smaay @ May 9, 2012 - 12:46 PM)  the 7A-FE trans shares the clutch with the 1ZZ/2ZZ but thats about it. i dont think the LSD is compatible ty smaay.. was hoping that you would chime in with some more info.. hehe.. but to be fair, (and i know that you have ALOT!!!! of exp with these motors and are always working on yotas of all types) but have you spent much time working on/in the A246E? i know that you are quite busy and most likely would not waist any of your time on this trans since so few of us would actually DO anything with it. but also have seen you do things most of us would consider taxing (like how you so easily tear-down, and rebuild motors) just for the sake of curiosity.. like if any of the ARP hardware you have laying around from motors X,Y, Z fits motor W.. lol -------------------- |
Posts in this topic
mandrek Any one have a clue on if there is any LSD that will fit in the A246E? May 9, 2012 - 2:34 AM
Bitter I don't think there are any. May 9, 2012 - 7:55 AM Special_Edy You could always spool it... May 9, 2012 - 10:36 AM mandrek spool it? May 9, 2012 - 10:45 AM Special_Edy Delete the spider gear or weld the axles together.... May 9, 2012 - 10:56 AM mandrek oh!! yeah.. lol... was not familiar with t... May 9, 2012 - 11:34 AM Smaay A246E is the ST 5 auto correct? i have never worke... May 9, 2012 - 12:08 PM
mandrek QUOTE (Smaay @ May 9, 2012 - 1:08 PM... May 9, 2012 - 12:23 PM richee3 Just curious, but what are your reasons to want to... May 9, 2012 - 1:11 PM mandrek QUOTE (richee3 @ May 9, 2012 - 2:11 ... May 9, 2012 - 2:58 PM Special_Edy Lol it always amazes me how bad a rap autos have a... May 9, 2012 - 1:49 PM BonzaiCelica c52 transmission can't handle much power. that... May 9, 2012 - 10:32 PM mandrek QUOTE (BonzaiCelica @ May 9, 2012 - 11... May 10, 2012 - 12:29 AM Bitter Eh, check the AISIN designation for the trans inte... May 10, 2012 - 7:40 AM BonzaiCelica I honestly don't know much about the c52 durab... May 10, 2012 - 2:23 PM Bitter I know that the C60 is much weaker than the U240E ... May 10, 2012 - 6:52 PM Kwanza26 All I have to say is... lol Auto... May 11, 2012 - 8:28 PM mandrek QUOTE (Kwanza26 @ May 11, 2012 - 9:2... May 11, 2012 - 9:13 PM njccmd2002 lol auto...
lol auto...
its a shame that all ca... May 11, 2012 - 9:21 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 26th, 2024 - 8:00 PM |