Projector Retrofit!, Finally Done! Options

[smkr3w]

***UPDATE***
Check PAGE 2 for Completed Pics!



Finally started work on putting together some projector headlights.

I started out with buying used/not installed Rayme Lenses.
And a spare set of low headlights to do work on.

Months later, last week I purchased Morimoto Mini H1's from TheRetrofitSource.


I was playing around with ideas for shrouds, and tried my hand at vacuum forming.. not bad I guess.

But I'm going to try something else.

Today I got antsy and had to try em out.. took awhile to remove the bumper kind of a PITA
*Note: Shrouds and Clear Lenses not installed yet*



Upclose


Against the garage the light pattern difference is obvious.


Both.. NOT adjusted yet!


This post has been edited by smkr3w: Jun 13, 2012 - 9:24 PM

[smkr3w]

Wow looks good.
Do the LED strips act as your turn signals? or only as you arm/disarm the alarm?
And do your stock turn signals still work as well, if the LEDs do act as your turns?

The way they're wired I have as only the running lights.
Currently waiting on a couple LED bulbs to come in the mail, these will be my blinkers which will actually be housed in the high beams!
The stock turn housings will be non-functional.

I wanna see a in-cabin picture of these

I'll try taking a pic tonight

[jordisonjr]

Wow looks good.
Do the LED strips act as your turn signals? or only as you arm/disarm the alarm?
And do your stock turn signals still work as well, if the LEDs do act as your turns?

The way they're wired I have as only the running lights.
Currently waiting on a couple LED bulbs to come in the mail, these will be my blinkers which will actually be housed in the high beams!
The stock turn housings will be non-functional.

Be sure to keep this thrad updated, interested in seeing how that will look.
You should shave the stock turns!

[smkr3w]

Wow looks good.
Do the LED strips act as your turn signals? or only as you arm/disarm the alarm?
And do your stock turn signals still work as well, if the LEDs do act as your turns?

The way they're wired I have as only the running lights.
Currently waiting on a couple LED bulbs to come in the mail, these will be my blinkers which will actually be housed in the high beams!
The stock turn housings will be non-functional.

Be sure to keep this thrad updated, interested in seeing how that will look.
You should shave the stock turns!

Will do, actually I should say that the high beams will still be functional, the led bulbs is off to the side in the housing which should illuminate the housing/reflector when it blinks.

Actually I plan on plasti-dipping the entire car and the turns will be painted over and left that way.. so still be kind of shaved but not in the sense of bodywork.