 Update Code 13 now, resolved!!!!!!!!!!!!&# |
 Jul 12, 2012 - 9:00 PM
|
 
|
|
Enthusiast  Joined Apr 22, '12 From florida Currently Offline Reputation: 1 (100%)  |
So because so many different things have happened since my last post i decided to start a new one. So here is the update: I got the new igniter put it in, car fired right up a lot easier. I was able to drive it and move it but the moment I let go of the gas pedal it died. Sprayed starting fluid fired up, let go of the throttle it died. We thought it might be the cat because there was a heavy gas smell when th car did fire up. started it once we removed the cat, it fired up but still would not hold once the throttle was let go. Changed the fuel filter, the old one was clogged, checked the pressure on the fuel, everything checked out. Injectors are getting signal just fine. now we are stumped.
Before anyone says ECU, we have swapped ecu's and it didnt change anything. So at this point any Idea's would be greatly appreciated. This post has been edited by gotian: Jul 20, 2012 - 7:35 AM |
 |
Replies
|
Jul 13, 2012 - 12:56 PM
|
|
 Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
you didnt touch the 2 main bolts to adjust it?? just the cap right?
-------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
Posts in this topic
gotian Update Code 13 now Jul 12, 2012 - 9:00 PM
kurt95gt QUOTE (gotian @ Jul 12, 2012 - 10:00... Jul 12, 2012 - 10:48 PM gotian it's not an idle problem, its an ignition prob... Jul 12, 2012 - 11:40 PM kurt95gt There's 2 diffrent ignition modules one on th... Jul 13, 2012 - 12:04 AM gotian Okay so I cleaned all the grounds. I found on the ... Jul 13, 2012 - 12:47 PM
gotian QUOTE (delusionz @ Jul 13, 2012 - 1... Jul 13, 2012 - 1:05 PM delusionz yep your timing will be completely f*cked then, fi... Jul 13, 2012 - 1:11 PM gotian QUOTE (delusionz @ Jul 13, 2012 - 1... Jul 13, 2012 - 1:14 PM gotian Final update. The new plugs helped out to fire up ... Jul 13, 2012 - 4:50 PM gotian So today the car had a rough time starting.we took... Jul 14, 2012 - 3:46 PM gotian Bah, this is driving me nuts....I put in the new d... Jul 18, 2012 - 1:15 AM trdproven try to borrow another ECU. Jul 18, 2012 - 2:10 AM gotian i dont have another ecu to borrow. is it possible ... Jul 18, 2012 - 7:21 AM gotian So I hate it when I'm searching through the fo... Jul 20, 2012 - 7:34 AM trdproven yea thats one problem that flew right by me, not a... Jul 20, 2012 - 10:00 AM gotian QUOTE (trdproven @ Jul 20, 2012 - 11... Jul 20, 2012 - 9:06 PM trdproven i was curious because toyota does have codes for c... Jul 20, 2012 - 11:11 PM gotian For obd1 it doesn't throw a code, obd2 will sh... Jul 21, 2012 - 9:29 AM trdproven actually on OBDI you can jumper your OBD E1 and TE... Jul 21, 2012 - 11:29 AM gotian we have an obd1 code scanner at our shop and it re... Jul 21, 2012 - 7:48 PM trdproven did you try jumping the pins though, ive had bette... Jul 21, 2012 - 11:16 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 1:27 AM |