Update Code 13 now, resolved!!!!!!!!!!!!&# Options

[gotian]

So because so many different things have happened since my last post i decided to start a new one. So here is the update: I got the new igniter put it in, car fired right up a lot easier. I was able to drive it and move it but the moment I let go of the gas pedal it died. Sprayed starting fluid fired up, let go of the throttle it died. We thought it might be the cat because there was a heavy gas smell when th car did fire up. started it once we removed the cat, it fired up but still would not hold once the throttle was let go. Changed the fuel filter, the old one was clogged, checked the pressure on the fuel, everything checked out. Injectors are getting signal just fine. now we are stumped.

Before anyone says ECU, we have swapped ecu's and it didnt change anything. So at this point any Idea's would be greatly appreciated.

This post has been edited by gotian: Jul 20, 2012 - 7:35 AM

[gotian]

Bah, this is driving me nuts....I put in the new distributor cranked the car and it fired up and ran like new all the way home. Got home turned it off and on to make sure it would fire up great and it did, cool.

went to start the car 10-15 minutes later car wouldnt fire up, throwing code 13...WTF timing is good, we adjusted it when we put the second new dizzy in, ignitor is good, new plugs, new wires, new cap and rotor, cleaned grounds. Now were stumped.

Help me 6gc you're my only hope!