Update Code 13 now, resolved!!!!!!!!!!!!&# Options

[gotian]

So because so many different things have happened since my last post i decided to start a new one. So here is the update: I got the new igniter put it in, car fired right up a lot easier. I was able to drive it and move it but the moment I let go of the gas pedal it died. Sprayed starting fluid fired up, let go of the throttle it died. We thought it might be the cat because there was a heavy gas smell when th car did fire up. started it once we removed the cat, it fired up but still would not hold once the throttle was let go. Changed the fuel filter, the old one was clogged, checked the pressure on the fuel, everything checked out. Injectors are getting signal just fine. now we are stumped.

Before anyone says ECU, we have swapped ecu's and it didnt change anything. So at this point any Idea's would be greatly appreciated.

This post has been edited by gotian: Jul 20, 2012 - 7:35 AM

[trdproven]

actually on OBDI you can jumper your OBD E1 and TE1 and coolant temp sensors are codes 4 and 22, what i gave as an example is for OBDII coding format. as long as its a sensor, your car should throw a code, thats where these trouble codes derive from - your sensors, and your auto tranny has the same thing, you jumper different pins and read the O/D blinks vice for engine related is Engine check blinks.

This post has been edited by trdproven: Jul 21, 2012 - 11:33 AM