![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Dec 29, '11 From Cincinnati, Ohio Currently Offline Reputation: 1 (100%) ![]() |
Just bought my first Celica, a 1996 GT convertible. I just want to say hi to everyone on the forum here. I've been reading everything on here the last few days and can't believe the amount of information on here. Best car forum I've been on, hands down.
![]() Most everything on the car is in great shape. No dents, a couple small scratches, no rust. The interior needs a little work, there is a large tear on the driver's seat on the outside edge, and the wood trim is in need of some reconditioning. The fog lights had some water in them and were corroded, so I need to get new ones. But other than that it's in great shape. I bought a few small things to do, red LEDs for the gauges and climate controls. White ones for most of the other lights. Silverstar Ultras high and low. I also bought a Ebay short throw shifter for a 7th gen. Things I'm planning on doing are: 17" Sport Edition CE wheels, bright satin w/ machined lip Tanabe GF or TRD springs TRD sway bars Custom CAI Different tail lights New stereo Some kind of exhaust, I think a 2.5" catback Possibly a spoiler And somewhere way down the line I'd like to swap in a BEAMS ![]() ![]() ![]() ![]() ![]() Comments? Ideas? Suggestions? Thanks! |
![]() |
![]() |
|
Enthusiast ![]() Joined Dec 29, '11 From Cincinnati, Ohio Currently Offline Reputation: 1 (100%) ![]() |
Finally got around to upgrading the speakers. Infinity Reference 6030cs in the rear, 6.5" woofers and separate 1" tweeters with crossovers installed in panels behind the front seats.
Did the 8 speaker conversion and put Infinity Reference 3032cf 3.5" 2-ways in the upper door spots. I removed the factory 6.5" and will be putting some 8" subs there when I have the money. I'm still deciding which ones to get, and what amp to get as well. Any I will be replacing the front door tweeters too. ![]() ![]() ![]() ![]() I also solved my cup holder problem: ![]() ![]() Got it for $5 off eBay, the ring part will open or close to fit whatever size cup, it can be attached with screws, but i used a couple adhesive velcro strips. It works great! |
![]() ![]() |
Lo-Fi Version | Time is now: February 21st, 2025 - 6:27 AM |