 Wheel Spacers!, Questions! Lol. |
 Jul 29, 2012 - 3:46 AM
|
 
|
 Enthusiast  Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%)  |
Ok. So I have a 97 Celica GT that's riding on the 7gc gts rims. As you all know the rims are "sunk" in without spacers. I've been thinking a lot about getting spacers for it but I don't know what size will be best? I was thinking 25mm in the front and 30mm in the back? I'm just worried if it'll be too far out to where it'll be rubbing. My Celica is on AG lowering springs (Never heard of AG but it was on the Celica when I bought it). Also are the eBay one's legit?
-------------------- |
 |
Replies
|
Aug 13, 2012 - 11:51 PM
|
|
|
Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
Ok so I'm back here looking for spacers again. What size is best to where I can get my 7th gen gts rims as close as I can outward? Without having to roll my fenders? I read on a forum where it said the specs for the 7gc GTS rims is 16x6.5 +39 (205/50/R16 Advan tyres). I also read the other forum about "flush fit wheel fitment". That forum helped me out a bit but isn't the "flush wheel" look different for all rims because of the sizes?
-------------------- |
|
Aug 14, 2012 - 12:28 AM
|
|
 Enthusiast Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%) |
QUOTE (ILoveMySilly97 @ Aug 14, 2012 - 12:51 AM)  Ok so I'm back here looking for spacers again. What size is best to where I can get my 7th gen gts rims as close as I can outward? Without having to roll my fenders? I read on a forum where it said the specs for the 7gc GTS rims is 16x6.5 +39 (205/50/R16 Advan tyres). I also read the other forum about "flush fit wheel fitment". That forum helped me out a bit but isn't the "flush wheel" look different for all rims because of the sizes? according to the chart because you have 6.5 wide wheels with et39 to be flush you will need to bring the front offset to 0 and the rear to -15 which means you will need 39mm wide spacers for the front and 54mm spacers for the back which is ridiculous wide. and i dont think you can get a 39mm wide if there are spacer that wide would be 40mm for the front and 50mm or 55mm for the back. i wouldnt recommend that. it is extremely wide. if you want to be flush i would get other wheels. or just get 25mm all around to bring the wheels out more. and you wont have to roll the fenders unless you car sits really low. if there is more than 2inches gap between your wheels and fenders dont worry about rolling them. it wont hit it. unless you have a lot of weight. unless is this close to the fender dont roll it. test your wheels then decide to roll it or not. 
This post has been edited by diegohiga: Aug 14, 2012 - 12:35 AM --------------------  |
Posts in this topic
ILoveMySilly97 Wheel Spacers! Jul 29, 2012 - 3:46 AM
Tigawoods 25's wont make you rub. I personally wouldnt g... Jul 29, 2012 - 9:30 AM ILoveMySilly97 I want to know why you personally wouldn't go ... Jul 29, 2012 - 2:52 PM
Tigawoods QUOTE (ILoveMySilly97 @ Jul 29, 2012 - 3... Jul 29, 2012 - 6:02 PM Red123 What about 15mm in front and 20mm back? Jul 29, 2012 - 2:57 PM mak5603 Just saying, I'm way over 25mm with my rears. ... Jul 29, 2012 - 7:51 PM jordisonjr Wow those are huge spacers lol. Jul 30, 2012 - 1:13 PM mak5603 QUOTE (jordisonjr @ Jul 30, 2012 - 11... Jul 30, 2012 - 4:02 PM 199celica I have 30mm rear and 25 in the front I had to cut ... Jul 30, 2012 - 2:20 PM Ted95 i have 25mm with GTS wheels and they have a little... Jul 30, 2012 - 6:10 PM ILoveMySilly97 I've read up about how it decreases your wheel... Jul 31, 2012 - 11:21 PM jordisonjr I'd rather be sunken then have to replace my w... Aug 1, 2012 - 1:22 PM mak5603 QUOTE (jordisonjr @ Aug 1, 2012 - 11... Aug 1, 2012 - 4:00 PM jordisonjr QUOTE (mak5603 @ Aug 1, 2012 - 5:00 ... Aug 1, 2012 - 4:17 PM manphibian 25mm spacers don't make much difference to whe... Aug 1, 2012 - 2:17 PM Tigawoods there are two different kinds of spacers too FYI
... Aug 1, 2012 - 8:57 PM mak5603 Mine are H&R traks with the studs already pres... Aug 1, 2012 - 10:26 PM mkernz22 I put longer studs in mine and I didn't need t... Aug 1, 2012 - 10:41 PM ILoveMySilly97 I see. Will thanks for all the information. At lea... Aug 1, 2012 - 11:46 PM malpaso I have some info for you as well...
1) studs on ... Aug 2, 2012 - 6:56 AM ILoveMySilly97 QUOTE (malpaso @ Aug 2, 2012 - 7:56 ... Aug 2, 2012 - 6:21 PM ILoveMySilly97 I don't what my lowering springs specs are but... Aug 14, 2012 - 6:52 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 26th, 2024 - 11:54 AM |