 Trans issue |
 Aug 20, 2012 - 10:31 AM
|
 
|
|
Enthusiast  Joined May 23, '12 From northridge,CA Currently Offline Reputation: 3 (100%)  |
Hello I have a 99 celica gt with only 95k miles when I bought at up until now I had this problem getting into gear at a full stop I'd clutch in and the shifter would be difficult to put it into gear very difficult it would click twice but u wouldn't feel the trans clucking or anything and when u drive it shifts just fine now I've replaced oem clutch slave and master and new fluid in the master cylinder bleeded the system and also changed the trans fluid and im still having this issue any ideas?
|
 |
Replies
|
Aug 27, 2012 - 11:50 AM
|
|
 Enthusiast Joined Mar 8, '09 From Westport, MA Currently Offline Reputation: 6 (100%) |
my coupe is having issues as well. my s54 will go into gear when it wants too.. at times it wont go into any gear at all and as you try and put it into gear it wants to pull the car forward. other times the car will shift fine and can actually make a trip down the road and back quick, then park it and wont go back into gear.. i replaced the master and slave and bleed it a million times but still acts up.
i can hear my 6puck chatter when the clutch is working []as it is disengaged but when it doesnt want to shift i dont hear the chatter at all. could i have sprung a spring in my clutch? im stuck at this point.. im going to check the shifter cables as it seems it could be an issue if its happened to you guys. ive replaced my master, slave, adjusted clutch pedal and car wont go into gear. but does go into gear when it feels like it. any ideas?? This post has been edited by Ted95: Aug 27, 2012 - 11:50 AM -------------------- st205 powered ss3 coupe
|
|
Aug 27, 2012 - 6:15 PM
|
|
 Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
QUOTE (Ted95 @ Aug 27, 2012 - 12:50 PM)  my coupe is having issues as well. my s54 will go into gear when it wants too.. at times it wont go into any gear at all and as you try and put it into gear it wants to pull the car forward. other times the car will shift fine and can actually make a trip down the road and back quick, then park it and wont go back into gear.. i replaced the master and slave and bleed it a million times but still acts up. i can hear my 6puck chatter when the clutch is working []as it is disengaged but when it doesnt want to shift i dont hear the chatter at all. could i have sprung a spring in my clutch? im stuck at this point.. im going to check the shifter cables as it seems it could be an issue if its happened to you guys. ive replaced my master, slave, adjusted clutch pedal and car wont go into gear. but does go into gear when it feels like it. any ideas?? That sounds to me like it might be your clutch. |
Posts in this topic
mi645 Trans issue Aug 20, 2012 - 10:31 AM
njccmd2002 cluthc? Aug 20, 2012 - 10:41 AM mi645 I haven't replaced the clutch but is there a w... Aug 20, 2012 - 10:46 AM Special_Edy It sounds like the syncronyzers. Drain your transm... Aug 20, 2012 - 10:57 AM mi645 Ok then I will try as u said u better be right I d... Aug 20, 2012 - 11:17 AM BonzaiCelica i'm having issues. I just replaced my car with... Aug 23, 2012 - 5:45 AM mi645 This sounds like the problem I am having also? But... Aug 23, 2012 - 7:15 AM
BonzaiCelica QUOTE (mi645 @ Aug 23, 2012 - 8:15 A... Aug 23, 2012 - 2:53 PM mi645 Honestly I changed the tranny fluid the clutch mas... Aug 23, 2012 - 5:13 PM BonzaiCelica QUOTE (mi645 @ Aug 23, 2012 - 5:13 P... Aug 23, 2012 - 5:46 PM SwissFerdi QUOTE (mi645 @ Aug 23, 2012 - 6:13 P... Aug 23, 2012 - 5:51 PM malecrod Had the same anoying problem that persisted even a... Aug 23, 2012 - 6:57 PM BonzaiCelica currently have a 95 camry s54 transmission cable. ... Aug 23, 2012 - 8:04 PM richee3 Round numbers, 52". Aug 23, 2012 - 8:17 PM BonzaiCelica really the longer s54 cable from the 94-99 celica ... Aug 23, 2012 - 9:09 PM richee3 "Round numbers" means it's close eno... Aug 23, 2012 - 9:28 PM BonzaiCelica sorry for sounding real paranoid I just don't ... Aug 23, 2012 - 9:53 PM mi645 From driving exp I was sure that it's not the ... Aug 24, 2012 - 2:06 AM BonzaiCelica QUOTE (mi645 @ Aug 24, 2012 - 3:06 A... Aug 24, 2012 - 2:40 AM mi645 Didn't know u can use beams parts for our 5sfe Aug 24, 2012 - 3:40 AM BonzaiCelica http://www.6gc.net/forums/index.php?showto...61995... Aug 25, 2012 - 1:47 AM BonzaiCelica yea more than likely yes. Read the first page. the... Aug 27, 2012 - 9:16 PM Ted95 QUOTE (BonzaiCelica @ Aug 27, 2012 - 10... Aug 27, 2012 - 11:18 PM BonzaiCelica got a question regarding clutch pedal adjustment. ... Aug 28, 2012 - 11:20 PM trdproven . Aug 29, 2012 - 6:03 PM trdproven QUOTE (Ted95 @ Aug 28, 2012 - 2:18 P... Aug 29, 2012 - 6:07 PM BonzaiCelica here's the scenario:
car's at a dead stop... Sep 15, 2012 - 2:05 AM Stambo did you do a oem clutch master? I've replaced ... Sep 15, 2012 - 9:08 AM BonzaiCelica my next thought was go with a napa clutch slave cl... Sep 17, 2012 - 12:50 AM Smaay have you checked all the cables and linkage? whats... Sep 17, 2012 - 12:24 PM BonzaiCelica QUOTE (Smaay @ Sep 17, 2012 - 12:24 ... Sep 17, 2012 - 12:31 PM BonzaiCelica now my car wont even go into 2nd, 4th, or Reverse ... Sep 19, 2012 - 11:28 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 7:32 AM |