![]() |
![]() |
![]() |
|
Enthusiast Joined Aug 31, '12 From canada Currently Offline Reputation: 0 (0%) ![]() |
i have the e153 lsd transmission whit the hybrid axles setup,
after changing my clutch for a new one, i did forgot to put back the nuts that hold the bracket that hold the right side axle in place, (the 2 bolt in middle axle that hold on the engine ) after a 200 km ride , i notice a weird noise , and when i push gas hard it spinning free in the trans, the car can move but, at 50 km/h i get a noise like very loud from the tranny. (the shaft was loose and moved to front and back into tranny ) can someone suggest what it can be ? maybe i damage the shaft from axle inside, or does the gear in the transmission get damage ? thanks This post has been edited by 1000_needles: Aug 31, 2012 - 2:43 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Oct 29, '11 From Haltom City, Texas Currently Offline Reputation: 1 (100%) ![]() |
pull the axleshaft out and examine the splines where it attaches to the tranny. Im willing to bet your axle slide out far enough that the splines wernt engaged and they just rubbed inside the differential. Im not sure that your LSD would survive being driven with only one axle or if it would burn up.
|
![]() |
|
Enthusiast Joined Aug 31, '12 From canada Currently Offline Reputation: 0 (0%) ![]() |
pull the axleshaft out and examine the splines where it attaches to the tranny. Im willing to bet your axle slide out far enough that the splines wernt engaged and they just rubbed inside the differential. Im not sure that your LSD would survive being driven with only one axle or if it would burn up. i had put back the bolt in the bracket but problem persist and the axle did not slide out, i think the lsd is burned |
![]() ![]() |
Lo-Fi Version | Time is now: April 22nd, 2025 - 2:19 PM |