St205 air intake questions, need help!, Different on WRC models? Options

[dudeofchaos]

I recently bought an OEM intake system for my WRC Gt-four to replace my ****ty aftermarket one and there seems to be a few things that don't match.

-There used to be a hole in my previous hose for the sensor, now there's not. (I have now plugged the sensor onto the airbox because the hole was there instead.)
-There's a plug for a hose on the top part of the airbox, but I have nothing to connect it to.
-The holes for the bolts on the car and in the airbox are not the same size.
-There are tabs on the airbox but I can't figure out on what they hook up to, they're pretty much hanging out with no purpose..

Anybody knows why? Maybe WRC models have their own specific intake which is similar to the standard version but not identical?

This post has been edited by dudeofchaos: Sep 10, 2012 - 9:00 PM

[enderswift]

I recently bought an OEM intake system for my WRC Gt-four to replace my ****ty aftermarket one and there seems to be a few things that don't match.

-There used to be a hole in my previous hose for the sensor, now there's not. (I have now plugged the sensor onto the airbox because the hole was there instead.)
-There's a plug for a hose on the top part of the airbox, but I have nothing to connect it to.
-The holes for the bolts on the car and in the airbox are not the same size.
-There are tabs on the airbox but I can't figure out on what they hook up to, they're pretty much hanging out with no purpose..

Anybody knows why? Maybe WRC models have their own specific intake which is similar to the standard version but not identical?

Just a few of my tear-down photos. Hope they help:









-My temp sensor is plugged into the upper gt4 airbox cover as well

-That hose plug is a source of filtered air for the IAC

-Dont know what to tell ya

-Those are most likely the tabs for supporting the wiring harness