 3sgte cranks but will not start, Possible anti theft mode |
 Sep 5, 2012 - 7:21 AM
|
 
|
|
Enthusiast  Joined Aug 23, '12 From New jersey Currently Offline Reputation: 0 (0%)  |
I swapped in a 3sgte in a 94 celica gt all the wiring done correctly (i hope) and now it cranks but wont start i hae no spark and my injectors r not firing any help would greatly be appreciated ...all lights work on dash so i dont think its the ecu any help would reallly help thanks
|
 |
Replies
|
Sep 12, 2012 - 6:46 AM
|
|
|
Enthusiast Joined Aug 23, '12 From New jersey Currently Offline Reputation: 0 (0%) |
I got it started but it wont start with the 3sgte ecu i got it started with the 5sfe ecu do i need to repin the 3sgte ecu im using the 3sgte wiring harness i dont think u should have to repin the ecu cause it came from the motor or is it possible i got a bad ecu
|
Posts in this topic
Joebo003 3sgte cranks but will not start Sep 5, 2012 - 7:21 AM
PhoenixTech Have you checked your main EFI fuse to make sure i... Sep 5, 2012 - 10:10 AM Joebo003 I replaced the efi fuse...... i cut a hole in the ... Sep 5, 2012 - 8:46 PM PhoenixTech Have you checked to see if you're getting powe... Sep 6, 2012 - 11:54 AM Joebo003 No i havent done that yet ill try that and see wha... Sep 6, 2012 - 6:18 PM Smaay its possible that you got a bad ECU, but im thinki... Sep 12, 2012 - 8:57 AM anonymous It sounds like you may not be getting a cylinder p... Sep 16, 2012 - 11:45 AM Joebo003 Do u have the write up for the ecu wiring i have n... Sep 17, 2012 - 7:56 PM BuiltNotBought Bump. Have same issue. Sep 25, 2012 - 4:10 PM bsamps4 Hopefully this topic will help you.
http://www.6g... Sep 26, 2012 - 7:43 AM Neon90424 here you go sir Sep 26, 2012 - 8:59 AM Joebo003 I had a someone do my wiring and everything seems ... Oct 2, 2012 - 9:17 PM team_omega What Gen 3sgte did you swap into your car? Oct 20, 2012 - 4:34 PM Soulend are you sure your timing is correct? that'll s... Oct 22, 2012 - 1:57 AM
Joebo003 Sorry havent been on here much its a 3rd gen and t... Oct 22, 2012 - 10:28 AM Smaay kick ass! i knew it was the ECU Oct 23, 2012 - 8:46 AM Joebo003 Car now runs and drives but its throwing a code 54... Dec 4, 2012 - 9:53 AM Neon90424 I thought you just had to bridge the conectors.. Jan 14, 2013 - 2:09 PM Smaay do this at the ECU connectors. This worked on my c... Mar 11, 2016 - 12:24 AM |
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 20th, 2025 - 3:18 PM |