 3sgte cranks but will not start, Possible anti theft mode |
 Sep 5, 2012 - 7:21 AM
|
 
|
|
Enthusiast  Joined Aug 23, '12 From New jersey Currently Offline Reputation: 0 (0%)  |
I swapped in a 3sgte in a 94 celica gt all the wiring done correctly (i hope) and now it cranks but wont start i hae no spark and my injectors r not firing any help would greatly be appreciated ...all lights work on dash so i dont think its the ecu any help would reallly help thanks
|
 |
Replies
|
Sep 12, 2012 - 8:57 AM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
its possible that you got a bad ECU, but im thinking that you need to re-pin for the 3S ECU. i know the injectors are in the same location, but sensors like G1 might be different. you not having any spark is telling me that the crank pos sensor in the distributor is not reading right.
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Posts in this topic
Joebo003 3sgte cranks but will not start Sep 5, 2012 - 7:21 AM
PhoenixTech Have you checked your main EFI fuse to make sure i... Sep 5, 2012 - 10:10 AM Joebo003 I replaced the efi fuse...... i cut a hole in the ... Sep 5, 2012 - 8:46 PM PhoenixTech Have you checked to see if you're getting powe... Sep 6, 2012 - 11:54 AM Joebo003 No i havent done that yet ill try that and see wha... Sep 6, 2012 - 6:18 PM Joebo003 I got it started but it wont start with the 3sgte ... Sep 12, 2012 - 6:46 AM anonymous It sounds like you may not be getting a cylinder p... Sep 16, 2012 - 11:45 AM Joebo003 Do u have the write up for the ecu wiring i have n... Sep 17, 2012 - 7:56 PM BuiltNotBought Bump. Have same issue. Sep 25, 2012 - 4:10 PM bsamps4 Hopefully this topic will help you.
http://www.6g... Sep 26, 2012 - 7:43 AM Neon90424 here you go sir Sep 26, 2012 - 8:59 AM Joebo003 I had a someone do my wiring and everything seems ... Oct 2, 2012 - 9:17 PM team_omega What Gen 3sgte did you swap into your car? Oct 20, 2012 - 4:34 PM Soulend are you sure your timing is correct? that'll s... Oct 22, 2012 - 1:57 AM
Joebo003 Sorry havent been on here much its a 3rd gen and t... Oct 22, 2012 - 10:28 AM Smaay kick ass! i knew it was the ECU Oct 23, 2012 - 8:46 AM Joebo003 Car now runs and drives but its throwing a code 54... Dec 4, 2012 - 9:53 AM Neon90424 I thought you just had to bridge the conectors.. Jan 14, 2013 - 2:09 PM Smaay do this at the ECU connectors. This worked on my c... Mar 11, 2016 - 12:24 AM |
6 User(s) are reading this topic (6 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 20th, 2025 - 3:21 PM |