![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jul 5, '12 From Barcelona Currently Offline Reputation: 0 (0%) ![]() |
My names Ed, and I live in Barcelona, Spain. I am from the Republic of Ireland. I've been living here for 13 years. In that time I've had a number of cars.
First one I got a year after arrival was a '93 Prelude 2.2 vtec. After that I got a '00 BMW 318ci. I sold that to get back into university. So now I've got this 1996 GT. Its covered in dents and scrapes. Pretty tired looking. I want to make it look like new, improve it where I can and try to keep it as standard as possible. I'll be painting it black, and keeping the wheels as they are, just tarting them up a bit. All of this depends on my finances of course, so it'll be a slow process. Patience will be required. Lots of patience. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() This post has been edited by Edser: Jul 21, 2022 - 5:58 PM -------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jul 5, '12 From Barcelona Currently Offline Reputation: 0 (0%) ![]() |
Here's a better pic of what the completed side looks like. It would look a lot better if I lowered it slightly of course, but that'll happen later.
It took me about four hours to do each wheel, and I masked and painted the hubs and calipers in situ (I had previously scrubbed the calipers clean) while I was waiting for the wheel paint to dry. I didn't get the passenger side front wheel sanded and polished, so it's the only one left to finish. I'll do that next week. I'll also scrub those tyres to get rid of paint marks and to generally improve their appearance. While I was waiting for paint to dry I also whipped off the stereo/aircon surround and the gaiter surround. I've been thinking about painting these with the same dark grey as the wheels, as the lower piece has a melt from a cigarette burn and the top has a LED in a hole (I think from an alarm - the wires aren't connected). These pieces came off surprisingly easily. The gear stick surround just jumped off when I pulled at it! They are all held on with simple clips, and two screws on the lower edge of the upper piece. I'm not surprised that when driving, the interior squeaked like party of mice on cocaine. Has anyone stopped the squeaking? How? I was thinking of smearing a tiny amount of silicone on all the edges in that are in contact. ![]() ![]() This post has been edited by Edser: Sep 17, 2012 - 4:41 AM -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: August 25th, 2024 - 4:00 PM |