Engine knock/rattle vs. fuel injectors??? Any help?, Video and description... |
Engine knock/rattle vs. fuel injectors??? Any help?, Video and description... |
Aug 29, 2012 - 12:40 PM |
|
Enthusiast Joined May 30, '12 From CA/NV Currently Offline Reputation: 0 (0%) |
So I've had my car for three months now and still cannot figure out what this noise is! I'm by no means a mechanic but have common sense around cars, celicas inparticular. It's a mostly stock 7a-fe with 194k and 5 spd tranny. The car runs fine, and since I've had her changed the oil, spark plugs/wires, exhaust manifold/down pipe(original was cracked), and have had no other problems...not even a check engine light. I can't find anything loose that would rattle, but there is a significant power steering fluid leak.
http://youtu.be/FOrH0HC7l5w Please see the video I put on youtube to hear the noise, which is most notable on a cold start and anytime I'm constantly holding revs over 2500rpms, but will stop if I floor the gas or let off it completely...It's very annoying on the freeway(but isn't noticable with the radio on! ha!). I'm thinking maybe a bad piston ring, or possibly something in the fuel injectors??? I should also say the noise does seem to emit from the passanger side of the engine bay. I'm worried it may be time for a rebuild as I do not know how the previous owners treated her. If that is the case my biggest challenge would be finding someone I trust to do the work, but I'm sure you guys can help point me in the right direction for that! -------------------- 2004 Celica GT-2zz w/6-speed swap
1999 Celica GT-3sgte swap 1993 Celica All-Trac 1997 Celica ST/Limited-rip 1993 Celica GT-rip my first love |
Sep 18, 2012 - 6:04 PM |
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
^^^ since you have a ST you should upgrade to a V6, not a crappy 3S-GTE that is too expensive.
now back on topic. Erynns car did the exact same thing. when i pulled it apart, this is what i found. all the bearings looked like this. luckily the crankshaft was fine. it just needed a polish and it cleaned up perfectly. -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Sep 19, 2012 - 2:05 PM |
|
Enthusiast Joined Jun 20, '12 From Tucson, az Currently Offline Reputation: 0 (0%) |
^^^ since you have a ST you should upgrade to a V6, not a crappy 3S-GTE that is too expensive. now back on topic. Erynns car did the exact same thing. when i pulled it apart, this is what i found. all the bearings looked like this. luckily the crankshaft was fine. it just needed a polish and it cleaned up perfectly. what v6 are you talking about??? |
Sep 19, 2012 - 2:33 PM |
|
Enthusiast Joined Oct 29, '11 From Haltom City, Texas Currently Offline Reputation: 1 (100%) |
what v6 are you talking about??? The same V6 that we told you about last time you asked. http://www.6gc.net/forums/index.php?showtopic=87433 |
Lo-Fi Version | Time is now: November 26th, 2024 - 8:32 AM |