3sgte St205 vs Mr2 |
3sgte St205 vs Mr2 |
Sep 18, 2012 - 5:14 PM |
|
Enthusiast Joined Jun 20, '12 From Tucson, az Currently Offline Reputation: 0 (0%) |
Ok guys I wana know if the 3sgte out of an MR2 is a direct bolt in to my 97 Celica ST. Please help. I've been told so many different things.
|
Sep 21, 2012 - 10:08 AM |
|
Enthusiast Joined Apr 22, '12 From Central NY Currently Offline Reputation: 5 (100%) |
1. OEM GT are typically fine as long as your not planning on going over 300hp. I purchased a set of GSP axels (for the GT) for mine that are almost twice as thick as the OEM. They should handle significantly more than 300hp.
2. The MR2 linkages will not work as they're a different length going from and MR car to an FF. The GT will work as long as you use the S54 transmission. If you do a complete conversion to an AWD trans, use the GT4 linkages. 3. You will have to at least use the 3SGTE ECU as well as the 2 bar MAP sensor from the engine. It is recommended that you use a stand alone engine management system though. 4. Wiring harness needs some fabrication. What kinds of fabrication, I don't know, never done one. But there are a few people on here that will do it for you and I see that there is also a premade harness being made now for this swap. -------------------- 99 Celica GT-S
91 Subaru Legacy Sport AWD Turbo 2010 Acura RDX Turbo w/ Technology Package 68 Impala SS Convertable |
Lo-Fi Version | Time is now: November 23rd, 2024 - 7:27 PM |