6G Celicas Forums

Welcome Guest ( Log In | Register )

> No power after 5s to 5s swap., kinda sucks, need help.
post Sep 20, 2012 - 3:57 PM
+Quote Post
Spider77



Enthusiast
*****
Joined Jan 17, '08
From JB MDL, NJ
Currently Offline

Reputation: 30 (100%)




Ok, so the engine is swapped over, learned somethings to hate, but besides that I have no power. I put the key in, turn it to ACC and nothing, turn to start and I can hear the relay clicking by the ECU. The only thing that works is lights. Thats it, no radio, no climate control, no cluster panel, and more importantly the car wont turn over. I even went so far as to replace my ecu and relay, but im in the same boat. My battery is good, rechecked my grounds, checked fuses...all good.
So Im at a loss here. Its kinda my DD so I need it up and running.
Thanks
 
Start new topic
Replies
post Sep 21, 2012 - 7:52 PM
+Quote Post
zfjohnson07

Enthusiast
****
Joined Apr 11, '09
Currently Offline

Reputation: 11 (100%)




any other noises when you turn the key, any lights dimming,


seems lately the main reasons causing celicas not to start is the ground on the transmission i know you checked it but could be that.

btw where did you get your engine and what was the mileage on it?
took you a weekend to do this ? did yo pull the trans as well?

This post has been edited by zfjohnson07: Sep 21, 2012 - 7:53 PM
post Sep 21, 2012 - 8:52 PM
+Quote Post
Spider77



Enthusiast
*****
Joined Jan 17, '08
From JB MDL, NJ
Currently Offline

Reputation: 30 (100%)




QUOTE (zfjohnson07 @ Sep 21, 2012 - 7:52 PM) *
any other noises when you turn the key, any lights dimming,


seems lately the main reasons causing celicas not to start is the ground on the transmission i know you checked it but could be that.

btw where did you get your engine and what was the mileage on it?
took you a weekend to do this ? did yo pull the trans as well?

The trans ground is good....i cleaned it ip and made sure the connection was tight. I got the engine from 2b...bout 160k on it. Im sure this is not a mechanical issue....

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 21st, 2025 - 7:47 AM