Is machining that expensive?, need conections. Options

[njccmd2002]

does anyone know any other good options...

this piece

for 130 USD... what?



i knew it was not going to be 5 bucks, but 130. geez.

anyone has any connections?

[97lestyousay]

yes it is expensive, but that seems a little high. Looks pretty simple but without knowing the accuracy you need it is hard to say, I would check around.
There are not many shops around that would even bother for 1 part.

An example, to have one rainguard waterjetted with my drawing was over $200

[njccmd2002]

yes it is expensive, but that seems a little high. Looks pretty simple but without knowing the accuracy you need it is hard to say, I would check around.
There are not many shops around that would even bother for 1 part.

An example, to have one rainguard waterjetted with my drawing was over $200

the thing is that cutting 20, the price reduces to 23 each. cutting 2 is 130. WTF, its like they dont want to bother. so if cutting 20 is 23 , thats probably the real cost.

one piece and they want to make all the money, its like a deterrent. Customers go away!!!

the website is emachineshop.com. and they say their prices are competitive, yeah competing to scare customers away.

[97lestyousay]

yes it is expensive, but that seems a little high. Looks pretty simple but without knowing the accuracy you need it is hard to say, I would check around.
There are not many shops around that would even bother for 1 part.

An example, to have one rainguard waterjetted with my drawing was over $200

the thing is that cutting 20, the price reduces to 23 each. cutting 2 is 130. WTF, its like they dont want to bother. so if cutting 20 is 23 , thats probably the real cost.

one piece and they want to make all the money, its like a deterrent. Customers go away!!!

the website is emachineshop.com. and they say their prices are competitive, yeah competing to scare customers away.

It is not that at all, most shops have a minimum rate for set up. That part, regardless of how simple it is, is going to have to be setup, which requires setting tools, finding a zero for the part, then cutting. The cutting part is nothing once the machine is setup. That part probably takes about 2 or 3 minutes to make when the machine is set up but a 1/2 hr or more minimum setup fee. Most shop rates are around 120 an hr so those numbers are probably around what you will get anywhere for a cnc. If I had a machine I would make a couple for you, but I don't, and the shop I work for now doesn't allow personal projects.