AT200 Front Pipe / Down Pipe, Which Front Pipe / Down Pipe do I need? Options

[6gBubbs]

Hi All,

My downpipe has come to the end of its life and needs to be replaced. However I am unsure which downpipe I need to order as there are 2 listed on the internet.

The parts are the Klarius 301969 measuring 950mm for the 6GC 1.8 from 6/96 onwards and the Klarius 301762 measuring 920mm for the 6GC 1.8 up to 6/96 and being sods law mine is right on the change over point so it is unknown which I have.

The easy way to know which I have is to measure the length of the pipe but my problem is I am unsure how the given length is measured, whether it be flange to flange along the pipe length or in a straight line ignoring the pipe curve or how??

I did buy a performance kit from eBay which is a pile of pooh. The face flange for bolting to the block was the wrong way round so it didn't line up and the downpipe came out 6 inches too short.

Any help given is greatly appreciated.

Thanks

Rob