Oil leaking from Input Shaft Seal?? 2nd Time replacing

Welcome Guest ( Log In | Register )

Oil leaking from Input Shaft Seal?? 2nd Time replacing, Is something bent, or what???????? :/

Sep 8, 2012 - 2:18 AM
injection View Member Profile Enthusiast Joined Jan 10, '11 From Trail BC Currently Offline Reputation: 1 (100%)	Hey fellas, just had my new input shafts installed, and new seals as well, couple days of driving, and one seal is leaking bad! Like 6 inch puddle of gear oil I'n about 30secones bad!, This is the second time I have replaced the seals, and still leaks, and I just had new Input Shafts installed as well, other ones were make thud sounds on lefts.......I am using the 5s tranny ( fwd ) with the st205 engine, have 285,000 KMs on the original GT tranny, a stage one clutch installed, and syncrohs feel really nice as well, any ideas why my seals keep blowing out?? I was told these trannys mate well with the st205, as long as your not tearing up the streets 24/7.... I'm thinkin something could be bent on my tranny, I think, or is there a tougher seal out there I can install???? Thanx fellas! PS. The Input Shafts are the stock ones for the 5s Tranny of course, and the seals too

Replies

Oct 10, 2012 - 1:25 PM
Smaay View Member Profile Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%)	are you sure you have the axle in all the way? -------------------- 2001 Celica GT-S Turbo 1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac

Posts in this topic

injection Oil leaking from Input Shaft Seal?? 2nd Time replacing Sep 8, 2012 - 2:18 AM

alltracman78 You've only got 1 input shaft. And only 1 inp... Sep 10, 2012 - 10:16 AM

SwissFerdi ^ I think he may mean axles, in this case, since h... Sep 10, 2012 - 12:17 PM

injection Correct, I am speaking of the axles, ( thought inp... Sep 15, 2012 - 9:03 PM

TerBeau im having the same exact issue. go under your car ... Sep 16, 2012 - 9:55 PM

injection QUOTE (TerBeau @ Sep 16, 2012 - 10:5... Oct 9, 2012 - 6:00 PM

Smaay are you sure you have the axle in all the way? Oct 10, 2012 - 1:25 PM

injection QUOTE (Smaay @ Oct 10, 2012 - 2:25 P... Oct 21, 2012 - 10:12 AM

TerBeau im 100% certain mines in. i pulled it into the sho... Nov 7, 2012 - 11:28 AM

2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)

0 Members:

Display Mode: Switch to: Standard · Switch to: Linear+ · Outline

Time is now: February 17th, 2025 - 4:44 AM