 ABS fault ,but no error codes, ABS at low speed |
 Oct 24, 2012 - 11:17 AM
|
 
|
 Enthusiast Joined Aug 2, '11 From Kent UK Currently Offline Reputation: 0 (0%)  |
Hi ,
I have had a fault on my brakes for some time , the ABS cuts in at low braking speeds. I have changed the discs & pads & bled the brakes and just passed the test ( I thought it would fail ) The ABS light goes out as it should and I have tried to get the codes but no luck, I removed the short pin and connected E1 toTC the first time the light went out and then flashed twice then a space of 2 or 3 seconds then twice again and it kept doing this no other break. I then thought to clear any error codes so pumped the brake 8 or 10 times with the ignition on ( not running ) tried again and got ABS light going out then a continuous pulse every second or so. Is there a code when everything is OK ? Help anyone. Thanks Trevor |
Posts in this topic
revelsumgt Sounds like you have a dodgy connection somewhere.... Nov 22, 2012 - 7:14 PM
revelsumgt p.s. found this whilst researching
If the ABS lig... Nov 22, 2012 - 7:23 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 26th, 2024 - 9:47 AM |