 Motor mount issues |
 Nov 13, 2012 - 2:06 PM
|
 
|
 Enthusiast  Joined Jun 5, '07 From Santa Maria Currently Offline Reputation: 1 (100%)  |
So I noticed my motor was sitting crooked. Its currently leaning downward on the passenger side. I found the rear mount (tranny) was busted (rubber cracked from one side to the other) so I went to the dealer and got a new one. It was a PITA to get in but I made it happen. After getting everything bolted back up I lowered my jack that was supporting the engine and to my surprise the engine was till crooked.
So the next day I unbolted the 3 bolts on the passenger side mount and after the last one came out the whole mount was loose. I found it was not even bolted to the engine. After getting it all the way out I found 2 of the 3 bolts that mount on the block are broken, inside the block. The third i have no idea where it went... Has this happened to anyone before? If so how did you get them out? Access is very limited. I don't see it being possible without removing the motor. What do you guys think? --------------------  |
Posts in this topic
Tigawoods the bolts for the bracket that the passenger side ... Nov 13, 2012 - 2:12 PM Smaay ^^^ thats what it sounds like, if that is the case... Nov 13, 2012 - 2:20 PM 95CelicaST Yeah, you will likely need to pull the motor to re... Nov 13, 2012 - 3:09 PM
Tigawoods QUOTE (95CelicaST @ Nov 13, 2012 - 3... Nov 13, 2012 - 3:15 PM 95CelicaST giggity.
gif unrelated, but I like it so screw ... Nov 13, 2012 - 3:38 PM k-weaver QUOTE (Tigawoods @ Nov 13, 2012 - 8... Nov 13, 2012 - 4:20 PM Special_Edy The broken bolts will either be a PITA to remove o... Nov 13, 2012 - 4:41 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 26th, 2024 - 12:46 AM |