95 auto 1mz project, started a list Options

[sidesh0]

hay guys, just bought my first 6gen bout a week ago, after my 87 gt-s was stolen about 6 months ago.

so now i have a 95 gt auto. decided i want to swap for the 1mz. done a lot of research and put together a list, but im still not clear on a couple things. hoping some of the badasses on 6gc can help me out.

so to start

1mzfe engine
hopefully one from a 03+ solara or sienna
with the wiring harness, ecu, intake,
solara ps pump, stock auto exhaust headers.

i know i gotta get my harness wired up, custom passenger mount and y pipe
(smaays looks beautiful by the way. definitely going to hit you up soon, if your still doing that)

but i still have a couple ?? marks over my head. and that is

will there be any problems with my stock auto trans. haha auto trans. say what you want.
but im going lsd and upgrading to handle the power. main question is, will it shift fine?? wire up just fine?

the only other questions are about obdII, and the fpr hookup,
specifically what is needed to make my 95 celica obdII. the evap system and such.
i live in cali. so smog is a must. ive heard its harder than the pre 97s,
but im curious what it really takes. cuz i really want to stay away from the sluge doomed years.

hope this interested anybody, lookin to get some help from the gurus here at 6gc.com, thanks guys.

This post has been edited by sidesh0: Nov 17, 2012 - 4:54 PM

[kurt95gt]

The mounting spots were way off.

As in the rear mount an the pass side axle mount were the same mount an about a foot away from where the celica mount would be. Then the front mount is on the engine too an these a shock mounted roughly where the mount would be on the celica. I can't remember on the drivers side mount tho
The stock trans will be much easier to use but is be concerned with the durablity of it backed by a 1mz

Honestly why not go 5speed?

Oh an smaay my is a cheap eBay nock off
I got one from a buddy an I think he said it a aem
Not 100% sure tho