 Crossmember/Brace, 95 GT ATM -> 95 GT MTM |
 Nov 22, 2012 - 12:00 PM
|
 
|
|
Enthusiast  Joined Mar 24, '11 From 704 Currently Offline Reputation: 3 (100%)  |
So the crossmember brace that goes from the front towards the back and has 2 of the motor mounts on it doesn't want to fit in place now that I put a manual it. It can be bolted in but its pushed up against the transmission sleeve (the thing that bolts onto the transmission on the bottom to keep grime from going into it)
The motor isn't sitting exactly how its supposed to but I was hoping to remedy this by putting in the crossmember. Only issue is now it leans up on the transmission sleeve. So is there a different crossmember between automatic and manual GTs or is the motor just in so much of a bind its making it seem like it wouldn't work properly? |
 |
Replies
|
Nov 22, 2012 - 12:11 PM
|
|
|
Enthusiast Joined Dec 28, '11 From GA Currently Offline Reputation: 0 (0%) |
The front/rear member is the same for all AT200/ST204. Did you get a manual transmission right side mount? The mounts for auto and manual are not the same and could cause misalignment if you use the auto mount on the manual transmission.
|
Posts in this topic
travisxcore Crossmember/Brace Nov 22, 2012 - 12:00 PM
trdproven the crossmembers are the same or at least i know b... Nov 22, 2012 - 5:07 PM
travisxcore I was thinking the subframe would work either way ... Nov 23, 2012 - 3:55 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 3rd, 2024 - 2:57 AM |