LED Third Brake Light, My Newest Design |
LED Third Brake Light, My Newest Design |
Nov 24, 2012 - 12:30 AM |
|
Enthusiast Joined Oct 29, '11 From Haltom City, Texas Currently Offline Reputation: 1 (100%) |
So I originally built a 58 Red LED third brake light and was dissatisfied with the result-
It was only about as bright as the OEM incandescent so it was back to the drawingboard. I finally had time today to solder this together, it uses 97 5mm White LEDs(the maximum amount I could cram in). The current draw is apx. 9 watts and the service life is apx. 100,000 hours. It is bright like headlight bright. First Layer of 57 LEDs- Second layer of 40 LEDs, Finished!!!!!!- And finally Video- http://www.youtube.com/watch?v=eh44hn_EBz4 If there is enough interest I may make some of these for 6gc members as well as some of the other exterior lights. This post has been edited by Special_Edy: Nov 24, 2012 - 3:01 AM |
Nov 28, 2012 - 4:26 PM |
|
Enthusiast Joined Nov 23, '11 From Moscow, Russia Currently Offline Reputation: 0 (0%) |
I prefer waterproof LED strips. And you can save A LOT of time instead of using millions of cheap LEDs.
Even if for some reason you don't like LED stripes, you can buy assembled arrays of LED on DX or eBay. |
Lo-Fi Version | Time is now: November 26th, 2024 - 9:13 AM |