 Burn marks on clutch and flywheel |
 Dec 8, 2012 - 8:25 PM
|
 
|
|
Enthusiast  Joined Oct 18, '07 From Orange County, CA Currently Offline Reputation: 3 (100%)  |
Hi everyone--
I got a lot of burn marks on both the plate of the clutch and the flywheel. The clutch is Competition Clutch Stage 2. The flywheel is stock; resurfaced when clutch was installed. I had the clutch less than a year and put less than 10K on it. I drove it pretty easy, and did not abuse it. Not sure what caused it. I'm getting the engine rebuilt, that's why I saw my clutch out. So my questions? Do I have them just put the clutch back in? Will those burn marks hurt anything? Should I order a new plate from Competition Clutch and get new flywheel? btw does getting a new plate fix the clutch? Thank you    
This post has been edited by JasonX: Dec 9, 2012 - 3:20 AM --------------------  |
 |
Replies
|
Dec 9, 2012 - 1:08 AM
|
|
|
Enthusiast Joined Oct 18, '07 From Orange County, CA Currently Offline Reputation: 3 (100%) |
I got the Stage 2 thinking it'll last longer than stock. Below pics are my stock clutch components. If I went back to stock, can I use the Competition Clutch disc with the stock clutch? would that make anything better. Also, I still do not fully understand why the Competition Clutch Stage 2 is said to be bad because of the marks, considering it is smooth and has no cracks, also fairly new. Any explanation would be great. Thx.
 
-------------------- |
Posts in this topic
JasonX Burn marks on clutch and flywheel Dec 8, 2012 - 8:25 PM
mkernz22 So what engine do you have that you need a stage 2... Dec 8, 2012 - 11:41 PM travisxcore I'd resurface the flywheel and go back to OEM ... Dec 9, 2012 - 2:54 AM JasonX thx. Also, based on the photos I posted, which pre... Dec 9, 2012 - 2:53 PM mkernz22 Just you don't want to mix and match different... Dec 9, 2012 - 3:27 PM TRDweaponX Most of your "performance clutches" or ... Dec 9, 2012 - 9:16 PM JasonX well the stage 2 was fun while it lasted. I'm ... Dec 10, 2012 - 1:38 AM
Smaay OMG here you all go again on the stage bandwagon. ... Dec 10, 2012 - 9:57 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 1st, 2024 - 6:12 PM |