![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 16, '04 From Los Angeles Currently Offline Reputation: 8 (100%) ![]() |
looking to sell 4 hubcentric 20mm spacers i bought for the celica. Have yet to put them on for the past year and decided to go with a diffrent rim with diffrent offset and have found that i dont need the spacers. The spacers are the ones which bolt up to the hub and have their own studs pressed into them.
The spacers are made for rims that have a void/space for the existing studs on the hub to fit into once the spacer is bolted to the hub and the rim bolted to the spacer. 100 shipped anywhere in the US This post has been edited by urbandork: Dec 17, 2012 - 9:38 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 16, '04 From Los Angeles Currently Offline Reputation: 8 (100%) ![]() |
as requested. this a pic of a pair bolted together to show what i was talking about before. the other pair is exactly the same.
As you can see they are new and never used since i decided to go with a different rim all together. As you can see not to much of the bolt will have to be shaved/ground off if used with a rim that doesnt have a space for an extruding stud and nut. Keep in mind if the rim doesnt have this void the stud on the hub will have to be cut down anyway... best way to do this is to thread a nut on and then cut so when you unthread the nut it will clean up the threads. ![]() ![]() ![]() This post has been edited by urbandork: Dec 10, 2012 - 1:29 PM |
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 6:35 AM |