![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Aug 25, '08 From England Currently Offline Reputation: 1 (100%) ![]() |
I was certain I started a build thread on here, but for the life of me I can not find it so forgive me if I start again and its old news.
About a year and a half ago my current GT4 failed its yearly inspection (MOT) with rusty sills, they were fixed and it subsequently passed but it set alarm bells ringing in my head that the poor things days were numbered. I decided that I would buy a shell and swap everything onto it. so I hunted for a reasonable shell to start work on. While I was looking, I had to extend my garage. I only had a single car garage so not enough space to work or store stuff. So I decided to extend my garage backwards a bit Work started. ![]() and after a few weeks, finished ;0 ![]() ![]() About the same time a shell turned up, well it was sold as a shell, but it was more or less a complete car minus the engine and gearbox. ![]() ![]() ![]() It was in good condition with no rust, even the interior was in pretty much spot on condition, not that I need much of it ![]() ![]() I set to wrok more or less straight away ![]() First job was to strip everything off the car ![]() everything went, all the looms, glass, suspension the works ![]() Next job was to remove the sound deadening material ![]() ![]() it then went outside for a thorough jet wash go get rid of all the years of crap ![]() ![]() As I was moving the battery to the inside I could remove the battery tray ![]() which I did ![]() ![]() Next up I needed to get to the bottom of the car....this was going to require some ingenuity. -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Aug 25, '08 From England Currently Offline Reputation: 1 (100%) ![]() |
I was going to have to make my own rotisserie.
So ack off to the wood yard, a few lengths of 2x4 and I made this ![]() It was about now I realised two things. One I was going to have to learn to weld and two..my plans for this car were changing quite dramatically......a fancied making a cross between a rally car and a GT car...no idea how I was going to achieve this, but the seeds had been set in my mind and for once they stayed there. So I rushed out and purchased a MIG welder....learning to weld was pretty easy to be honest, by no means as neat as the pros but not bad for a complete novice. So I made a rotisserie ![]() It fitted like a glove and worked perfectly ![]() A quick look revealed the sills were pretty mangled ![]() so I had to fix them up as best I could ![]() At the same time I started blasting and painting with good old POR15 the subframes and suspension parts ![]() The came out quite nice ![]() did the prop shaft too, started a bit rough ![]() came up well ![]() also cleaned up the steering rack ![]() and the alloy diff end plate....gave it a good polish ![]() Next up I started the worst job I have ever attempted -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: August 18th, 2024 - 7:26 PM |