Doctavic's 96 Celica ST Options

[doctavic]

I've been on here for a few months now, but finally getting around to this. Here is my 1996 Celica ST. I bought it from my friend, who was the original owner, in July with 98k. All it needed was a fix to the rear bumper and an AC compressor, which was the first thing I bought and installed. Still haven't gotten to that bumper, but looking. I don't have a pic of that, or very many pictures of when I first got it, but here is the one I have:



Next, I got a set of Scion TC rims with decent tires (~80% thread left) for $300:



Then, I got a Ralco RZ short throw (7gc) from ebay and installed. It took a while, but the thread on installing these was great and I got all my questions answered. I bought a knock off TRD knob off ebay, and installed that but I didn't like the feel...



...so I tried the weighted knob that came with the Ralco short throw and it really made for nice shift feel. I cut the ring off the boot and tied it down, gives a nice look:



Next, I installed a Clarion CD/Ipod player with bluetooth that I got from Crutchfield, came with a remote too. Easy install, really improved sound quality but I still need new speakers all around.




Then side skirts:



JDM Kouki tails:

In process:


installed:


Then there is the K&N 57i Series Performance Intake Kit made for the 7AFE:

(pic shows the TRD 3-point front strut bar I just installed, see below):


and a video for sound: (there is a rattle between 2500-2800 rpm that I can't find... I think its a heat shield)

Link to video:
http://s1267.beta.photobucket.com/user/cel...f9e559.mp4.html

...then came this weekend. This weekend I installed new KYB GR-2 struts all around, TRD lowering springs, a TRD 3-point front strut bar, a GT-Four rear strut bar, and a steering wheel from a '98:

Throwing on a 20" rim from my friends' shop, just for fun:



GT-Four rear strut bar:


TRD 3-point front strut bar:


Steering wheel (I bought the sub-harness adapter so the airbag works and there is no light):



...and the final (lowered) product... for now (oh, with clear side marker lights):



...still need to fix the bumper!


This post has been edited by doctavic: Nov 18, 2012 - 8:58 PM

[doctavic]

Got my rear bumper from dkdmonk last week, and got around to installing it...

Took off the old bumper, lights, and license plate bezel...


Then took the write junkyard writing on the bumper off with some brake fluid (water did not work, looked online):


...and the end result: (I also put a TRD emblem on the trunk)





...and got around to installing the SS-III grill and TRD badge:



This post has been edited by doctavic: Dec 16, 2012 - 4:41 PM