Trouble Bleeding Rear Brakes, Rear left one is fine but nothing comes out of rear right |
Trouble Bleeding Rear Brakes, Rear left one is fine but nothing comes out of rear right |
Dec 20, 2012 - 11:20 AM |
|
Enthusiast Joined Dec 18, '08 From Oxford, England Currently Offline Reputation: 0 (0%) |
I recently overhauled both rear calipers and now i've put them back on they require bleeding. With the help of a friend who did the pedal pushing I first bled the rear left (passenger, uk) caliper which went fine. However the rear right one just will not bleed. Nothing comes out as far as I can tell, not even air. I have taken the bleed nipple off and it is not obstructed, i can blow air through it. What the hell is causing this? I'd really appreciate some help as the weather is grim and my only other means of transportation is a motorbike.
|
Dec 20, 2012 - 1:29 PM |
|
Enthusiast Joined Dec 18, '08 From Oxford, England Currently Offline Reputation: 0 (0%) |
I took the callipers apart and replaced the seals and pistons which is why I have to bleed them now they're back on. I am following that bleeding procedure, yes.
I have connected the bleed nipple to a clear hose but nothing comes out, not even bubbles. Very frustrating. The reservoir does not lose fluid during my attempted bleeds. I should also note that that the peal goes to the floor every time. This post has been edited by LTom: Dec 20, 2012 - 1:31 PM |
Lo-Fi Version | Time is now: December 2nd, 2024 - 7:51 AM |