 My new Celica ST205 GT4 |
 Dec 28, 2012 - 7:36 PM
|
 
|
|
Enthusiast  Joined Jul 13, '11 From Lincs, UK Currently Offline Reputation: 0 (0%)  |
Hello,
Pretty much a lurker of the forum but thought I would share. After a very short period of no Gen 6 ownership I bought another GT4. It had pretty much the spec what I wanted to get my previous car to and was a very nice example so it made sense. I might get slated for buying a pre-modified car but I don't care to be honest! 1994 Celica ST205 GT4 JDM Spec: Engine etc: Garrett Ball bearing GT3071r kit (4" intake version) with Tial external wastegate, 3" downpipe and screamer pipe Apexi PFC and Commander Mapped by Ryan G from 2Bartuning Sard 800's Ported manifold 3" Japspeed stainless steel exhaust Blitz SBC -ID III -Spec R and Blitz power meter Innovate wideband sensor with afr gauge Walbro 255 fuel pump Straight intake with big K+N filter Magnecor KV85 8.5mm leads Evo 8 fmic Blitz bov Omex rev limiter/launch control operated from clutch pedal switch Suspension/brakes: BC coilovers Grooved Toyota front discs,ebc rear discs and yellow stuff pads front and rear Whiteline adjustable rear arb Hel brake hoses Cooling: RTP alloy radiator Slim fans with override switch TRD thermostat Turbo pre rad cooler Mocal oil cooler Mocal thermostatic sandwich plate Mocal braided hoses C-One cooling panel Swirl pot and header tank system Silicone hoses Interior: Momo steering wheel Momo alloy gear knob Alloy pedals White Dials switchable from green to blue Full leather interior Carbon fibre dash bits Exterior: Carbon fibre wind deflectors Carbon fibre door sills TRD side skirts and side spats De-tangoed Later lights Spoiler riser blocks Cat1 Alarm and immobiliser      |
 |
Replies
|
Dec 29, 2012 - 5:56 AM
|
|
|
Enthusiast Joined Jul 13, '11 From Lincs, UK Currently Offline Reputation: 0 (0%) |
Thanks guys
 I wouldn't know if it was a genuine one or not to be honest - as far as I am concerned it's a bit of sheet metal What gap do you refer to?Next plans are to get a forged engine if I can raise the funds and decide what I want...as running 1.6 bar on the stock internals is asking for something to break (even though it has had this setup for about 2 years) Alex This post has been edited by alex1981: Dec 29, 2012 - 5:56 AM |
Posts in this topic
alex1981 My new Celica ST205 GT4 Dec 28, 2012 - 7:36 PM
Wolfsting nice , good to see another uk owner as well Dec 28, 2012 - 8:55 PM Neon90424 very nice car!
I believe the original C-ONE c... Dec 28, 2012 - 10:32 PM S8S8 Looks awesome. Nice purchase.
QUOTE (alex1981 ... Dec 29, 2012 - 7:23 AM alex1981 Thanks
Indeed. Don't get me wrong - I love t... Dec 29, 2012 - 7:39 AM Neon90424 1,6 bar, and no smoking? you sure thats not forged... Dec 29, 2012 - 8:01 AM alex1981 No smoking, turbo picks up hard from low revs all ... Dec 29, 2012 - 8:11 AM Neon90424 I never understood why they left a gap in the repl... Dec 29, 2012 - 8:29 AM yellowchinaman hi Alex. Ray here at RTP. Did yiu ever get that dy... Dec 29, 2012 - 10:11 AM johnyboy1976 Looks like a car belonging to a old GT4OC member f... Dec 29, 2012 - 10:17 AM alex1981 Correct Johny
Ray: No idea who did the plumbing ... Dec 29, 2012 - 10:27 AM Neon90424 I wonder why they kept the stock exhaust manifold.... Dec 29, 2012 - 10:52 AM alex1981 What manifold would you suggest, then? Or is it a ... Dec 29, 2012 - 11:02 AM alex1981 Thinking about what you said...I assume you have a... Dec 29, 2012 - 11:20 AM alex1981 Nipped out and took an interior shot. Sorry for th... Dec 29, 2012 - 11:35 AM johnyboy1976 Standard manifold is strong and wont break and if ... Dec 29, 2012 - 12:53 PM yellowchinaman As johny said. unless youre running very big hp th... Dec 29, 2012 - 1:10 PM alex1981 Ah fair enough. What power do you think the stock ... Dec 29, 2012 - 1:40 PM
SwissFerdi QUOTE (alex1981 @ Dec 29, 2012 - 1:4... Dec 29, 2012 - 2:33 PM RobStar86 Beautiful GT-Four! Dec 29, 2012 - 2:09 PM alex1981 Thanks Ferdi :-) Dec 29, 2012 - 2:36 PM johnyboy1976 Another one but with late specs - the wifes car Dec 29, 2012 - 3:48 PM alex1981 Cool :-) just need to see a silver one! Dec 29, 2012 - 3:53 PM johnyboy1976 RE: My new Celica ST205 GT4 Dec 29, 2012 - 4:08 PM alex1981 Cheers :-) will have a think on it :-) Dec 29, 2012 - 4:26 PM delusionz hey bro really nice car, especially the bodywork
... Dec 29, 2012 - 6:30 PM alex1981 Thanks
I do not have the FC Datalogit I am afrai... Dec 29, 2012 - 6:44 PM alex1981 Few more pics for you - taken by Loki Powers Photo... Jan 2, 2013 - 8:58 PM yellowchinaman Unfortunately Alex we no longer sell those rads so... Jan 7, 2013 - 5:30 AM delusionz and wheres the pressure release!!! Jan 7, 2013 - 5:39 AM alex1981 Ah fair enough if you don't sell them. If you ... Jan 7, 2013 - 6:18 AM yellowchinaman QUOTE (alex1981 @ Jan 7, 2013 - 6:18... Jan 7, 2013 - 7:30 AM alex1981 Sorry yes should have added there is a pipe from t... Jan 7, 2013 - 8:49 AM yellowchinaman Thanks Alex
That explains a lot. I'm going for... Jan 7, 2013 - 9:10 AM alex1981 It might just about fit there if it sat as low ont... Jan 7, 2013 - 9:53 AM yellowchinaman QUOTE (alex1981 @ Jan 7, 2013 - 9:53... Jan 7, 2013 - 12:48 PM alex1981 Comment about pressure release. Actually, that is ... Jan 26, 2013 - 8:08 AM alex1981 Just a little update. Currently in the bodyshop ge... Aug 28, 2013 - 1:47 PM alex1981 So....to expand on the bodywork bits.
I took the ... Oct 30, 2013 - 4:43 PM alex1981 Weeks later I went over to the bodyshop. It felt l... Oct 30, 2013 - 5:02 PM JoshuaM Wow, that's a lot of work! Have you given ... Oct 30, 2013 - 5:19 PM alex1981 That must be irritating!
Yeah not much is bei... Oct 30, 2013 - 7:35 PM alex1981 Got 6 new wheels (yes, 6, don't ask!) whic... Nov 22, 2013 - 11:11 AM alex1981 Oh I should have said I have also put an order in ... Nov 22, 2013 - 11:16 AM |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 25th, 2024 - 10:36 PM |