![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Sep 6, '12 From Holland Currently Offline Reputation: 1 (100%) ![]() |
I have a problem with a while with opening my trunk. With a pull the release lever or when i turn the key, the trunk will open but just not completely. The only way to open the trunk is to simultanously pull the trunk itself and turn the key.
Is this a common problem? How can this be fixed? -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 6, '04 From Charlotte, NC Currently Offline Reputation: 9 (100%) ![]() |
Trunk hinge supports need to be replaced. My car does the exact same thing and I believe replacing the support struts will resolve it.
-------------------- Has no more Celicas
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
Trunk hinge supports need to be replaced. My car does the exact same thing and I believe replacing the support struts will resolve it. there is another thread i have saved in my bookmarkers. thing is I dont know how to import the bookmarkers from the hard drive back to firefox. i'll let you know asap -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jul 24, '08 From Canoga Park CA. Currently Offline Reputation: 0 (0%) ![]() |
Trunk hinge supports need to be replaced. My car does the exact same thing and I believe replacing the support struts will resolve it. there is another thread i have saved in my bookmarkers. thing is I dont know how to import the bookmarkers from the hard drive back to firefox. i'll let you know asap For the firefox click on bookmarks in upper right and then show all bookmarks you will see import and export bookmarks(you must have bookmarks bar enable ) As for the trunk mine was wrecked when I bought it and the trunk latch(u shaped thing ) was bent to the left a little so it would grab and not open easily. use a monkey wrench and bend it so it is centered in the latch mechanism. Good luck to both |
![]() ![]() |
Lo-Fi Version | Time is now: February 21st, 2025 - 8:46 AM |